[U-Boot] [PATCH] ARM: Davinci DM355: Enabling DM9000 on DM355 EVM

[s-paulraj at ti.com]

From: Sandeep Paulraj <s-paulraj at ti.com>

Due to recent changes to the NET support on U-boot, DM9000
is no longer detected on the DM355 EVM.
This minor update enables DM9000 on the DM355 EVM.
Tested on the DM355 EVM

Signed-off-by: Sandeep Paulraj <s-paulraj at ti.com>
---
 board/davinci/dm355evm/dm355evm.c |   10 +++++++++-
 1 files changed, 9 insertions(+), 1 deletions(-)

diff --git a/board/davinci/dm355evm/dm355evm.c b/board/davinci/dm355evm/dm355evm.c
index 398f527..0a44748 100644
--- a/board/davinci/dm355evm/dm355evm.c
+++ b/board/davinci/dm355evm/dm355evm.c
@@ -23,7 +23,8 @@
 #include <asm/arch/emif_defs.h>
 #include <asm/arch/nand_defs.h>
 #include "../common/misc.h"
-
+#include <net.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -79,6 +80,13 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+	return dm9000_initialize(bis);
+}
+#endif
+
 #ifdef CONFIG_NAND_DAVINCI
 
 static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip)
-- 
1.6.0.4