[U-Boot] [PATCH] Add support for USB on PSC3 for the mpc5200

Eric Millbrandt emillbrandt at coldhaus.com
Thu Aug 13 15:32:37 CEST 2009


Support USB on PSC3 on the mpc5200.  Before this patch, enabling USB support
would reconfigure PSC4 and PSC5 to USB.  The mpc5200 does not support USB
enabled on both the standard USB port and PSC3.  This patch masks the
appropriate bits when enabling USB.

Signed-off-by: Eric Millbrandt <emillbrandt at dekaresearch.com>
---
 README                 |    4 ++++
 cpu/mpc5xxx/usb.c      |    6 +++++-
 cpu/mpc5xxx/usb_ohci.c |    6 +++++-
 3 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/README b/README
index 9071472..a8dc1cd 100644
--- a/README
+++ b/README
@@ -854,9 +854,13 @@ The following options need to be configured:
 		MPC5200 USB requires additional defines:
 			CONFIG_USB_CLOCK
 				for 528 MHz Clock: 0x0001bbbb
+			CONFIG_PSC3_USB
+				for USB on PSC3
 			CONFIG_USB_CONFIG
 				for differential drivers: 0x00001000
 				for single ended drivers: 0x00005000
+				for differential drivers on PSC3: 0x00000100
+				for single ended drivers on PSC3: 0x00004100
 			CONFIG_SYS_USB_EVENT_POLL
 				May be defined to allow interrupt polling
 				instead of using asynchronous interrupts
diff --git a/cpu/mpc5xxx/usb.c b/cpu/mpc5xxx/usb.c
index 8f2b66a..bec7da3 100644
--- a/cpu/mpc5xxx/usb.c
+++ b/cpu/mpc5xxx/usb.c
@@ -32,9 +32,13 @@ int usb_cpu_init(void)
 	/* Set the USB Clock						     */
 	*(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK;
 
+#ifdef CONFIG_PSC3_USB /* USB is using the alternate configuration */
+	/* remove all PSC3 USB bits first before ORing in ours */
+	*(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00804f00;
+#else
 	/* remove all USB bits first before ORing in ours */
 	*(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000;
-
+#endif
 	/* Activate USB port						     */
 	*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG;
 
diff --git a/cpu/mpc5xxx/usb_ohci.c b/cpu/mpc5xxx/usb_ohci.c
index 61a4e3f..66a4af8 100644
--- a/cpu/mpc5xxx/usb_ohci.c
+++ b/cpu/mpc5xxx/usb_ohci.c
@@ -1576,9 +1576,13 @@ int usb_lowlevel_init(void)
 	/* Set the USB Clock						     */
 	*(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK;
 
+#ifdef CONFIG_PSC3_USB /* USB is using the alternate configuration */
+	/* remove all PSC3 USB bits first before ORing in ours */
+	*(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00804f00;
+#else
 	/* remove all USB bits first before ORing in ours */
 	*(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000;
-
+#endif
 	/* Activate USB port						     */
 	*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG;
 
-- 
1.6.3.1



More information about the U-Boot mailing list