[U-Boot] Fw: Regarding 8641D uboot

[Thirumalai]

----- Original Message ----- 
From: "Kumar Gala" <galak at kernel.crashing.org>
To: "Thirumalai" <thirumalai.p at datapatterns.co.in>
Sent: Tuesday, August 18, 2009 7:45 PM
Subject: Re: Regarding 8641D uboot


> Please ask these questions on the u-boot list.
>
> - k
>
> On Aug 17, 2009, at 10:19 PM, Thirumalai wrote:
>
>> Hi Kumar,
>>       Correct me if i am wrong. The multi cpu system that mentioned 
>> release.S file meant for only dual Core 8641 processor right or will  it 
>> meant for more than one dual core processor. Kindly clarify me.
>>
>> If suppose i am having a flash memory which is shared among 2  processors 
>> is it possible to use the flash by other processors to boot ?
>>
>> Is there any support for RIO has added on the uboot. Kindly let me  know 
>> if so.
>> Regards,
>> T.
>>
>> ----- Original Message ----- From: "Kumar Gala" 
>> <galak at kernel.crashing.org
>> >
>> To: "Thirumalai" <thirumalai.p at datapatterns.co.in>
>> Sent: Wednesday, August 12, 2009 4:06 AM
>> Subject: Re: Regarding 8641D uboot
>>
>>
>>> 2.6.30 should be perfectly fine for 8641D.
>>>
>>> - k
>>>
>>> On Aug 11, 2009, at 9:48 AM, Thirumalai wrote:
>>>
>>>> Hi kumar,
>>>>  What linux kernel version is stable for 8641D processor that i  can 
>>>> use. Is there any modifications has happened on device tree.  kindly 
>>>> let me know the information. I have downloaded 2.6.30  kernel which i 
>>>> compiled on ELDK-4.0 and try to boot my custom  hardware which is 
>>>> based on MPC7448 processor with TSI109 system  controller. But the  pci 
>>>> enumeration is not happening properly and  because of this the  target 
>>>> is not booting up fully. i.e hanged up  at ethernet driver 
>>>> initialization.
>>>>
>>>> Kindly let me know any mailing lists that can information  regarding 
>>>> powerpc kernel development.
>>>>
>>>> Expecting quick response
>>>> Regards,
>>>> T.
>>>>
>>>>>
>>>>> ----- Original Message ----- From: "Kumar Gala" 
>>>>> <galak at kernel.crashing.org
>>>>> >
>>>>> To: "Thirumalai" <thirumalai.p at datapatterns.co.in>
>>>>> Sent: Thursday, August 06, 2009 7:43 PM
>>>>> Subject: Re: Regarding 8641D uboot
>>>>>
>>>>>
>>>>>> v2009.06 should be fine for 8641D.
>>>>>>
>>>>>> - k
>>>>>>
>>>>>> On Aug 6, 2009, at 1:03 AM, Thirumalai wrote:
>>>>>>
>>>>>>> Hi kumar,
>>>>>>>     I just want know what is the stable u-boot release which i   can 
>>>>>>> use for porting of my new customized 8641D based processor   board. 
>>>>>>> Earlier i have downloaded u-boot-2009-06.
>>>>>>>     Kindly give me the development environment information  also. 
>>>>>>> Earlier i used ELDK-4.0 for compilation.
>>>>>>> Regards,
>>>>>>> T.
>>>>>>>
>>>>>>> **************** CAUTION - Disclaimer *****************This   email 
>>>>>>> may contain confidential and privileged material for the
>>>>>>> sole use of the intended recipient(s). Any review, use,   retention, 
>>>>>>> distribution or disclosure by others is strictly   prohibited. If 
>>>>>>> you are not the intended recipient (or  authorized  to receive for 
>>>>>>> the recipient), please contact the  sender by reply  email and 
>>>>>>> delete all copies of this message.  Also, email is  susceptible to 
>>>>>>> data corruption, interception,  tampering,  unauthorized amendment 
>>>>>>> and viruses. We only send  and receive  emails on the basis that we 
>>>>>>> are not liable for any  such  corruption, interception, tampering, 
>>>>>>> amendment or viruses  or any  consequence thereof. *********** End 
>>>>>>> of Disclaimer   ***********DataPatterns ITS Group**********
>>>>
>>>>
>>>> **************** CAUTION - Disclaimer *****************This email   may 
>>>> contain confidential and privileged material for the
>>>> sole use of the intended recipient(s). Any review, use, retention, 
>>>> distribution or disclosure by others is strictly prohibited. If  you 
>>>> are not the intended recipient (or authorized to receive for  the 
>>>> recipient), please contact the sender by reply email and  delete all 
>>>> copies of this message. Also, email is susceptible to  data 
>>>> corruption, interception, tampering, unauthorized amendment  and 
>>>> viruses. We only send and receive emails on the basis that we  are  not 
>>>> liable for any such corruption, interception, tampering,   amendment or 
>>>> viruses or any consequence thereof. *********** End  of  Disclaimer 
>>>> ***********DataPatterns ITS Group**********
>>
>>
>> **************** CAUTION - Disclaimer *****************This email  may 
>> contain confidential and privileged material for the
>> sole use of the intended recipient(s). Any review, use, retention, 
>> distribution or disclosure by others is strictly prohibited. If you  are 
>> not the intended recipient (or authorized to receive for the  recipient), 
>> please contact the sender by reply email and delete all  copies of this 
>> message. Also, email is susceptible to data  corruption, interception, 
>> tampering, unauthorized amendment and  viruses. We only send and receive 
>> emails on the basis that we are  not liable for any such corruption, 
>> interception, tampering,  amendment or viruses or any consequence 
>> thereof. *********** End of  Disclaimer ***********DataPatterns ITS 
>> Group**********
> 


**************** CAUTION - Disclaimer *****************This email may contain confidential and privileged material for the
sole use of the intended recipient(s). Any review, use, retention, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. Also, email is susceptible to data corruption, interception, tampering, unauthorized amendment and viruses. We only send and receive emails on the basis that we are not liable for any such corruption, interception, tampering, amendment or viruses or any consequence thereof. 
*********** End of Disclaimer ***********DataPatterns ITS Group**********