[U-Boot] [PATCH v3] Adding support for DevKit8000

[Frederik Kriewitz]

On Thu, Aug 20, 2009 at 7:28 PM, Dirk Behme<dirk.behme at googlemail.com> wrote:
> Peter Tyser wrote:
>>
>> Hi Frederik,
>> I had some minor aesthetic nitpicks.  I'd change the title to "Add
>> support for the DevKit8000 board".
>>

I'll fix them

>>>
>>>  Unknown / orphaned boards:
>>> diff --git a/MAKEALL b/MAKEALL
>>> index edebaea..34235b7 100755
>>> --- a/MAKEALL
>>> +++ b/MAKEALL
>>> @@ -581,6 +581,7 @@ LIST_ARM_CORTEX_A8="                \
>>>        omap3_pandora           \
>>>        omap3_zoom1             \
>>>        omap3_zoom2             \
>>> +       devkit8000      \
>>>  "
>>
>> You should maintain the alphabetical order of LIST_ARM_CORTEX_A8.
>
> What's about using 'omap3_devkit8000' ?

On Thu, Aug 20, 2009 at 7:02 PM, Peter Tyser<ptyser at xes-inc.com> wrote:
> Hi Frederik,
> I had some minor aesthetic nitpicks.  I'd change the title to "Add
> support for the DevKit8000 board".

Ok, I'll fix them.

Jean-Christophe asked me to move it out of the omap3 "vendor" directory:

On 10:55 Thu 20 Aug     , Frederik Kriewitz wrote:
> On Thu, Aug 20, 2009 at 12:19 AM, Jean-Christophe
> PLAGNIOL-VILLARD<plagnioj at jcrosoft.com> wrote:
> >>  board/omap3/devkit8000/Makefile     |   52 +++++
> >>  board/omap3/devkit8000/config.mk    |   35 ++++
> >>  board/omap3/devkit8000/devkit8000.c |  124 ++++++++++++
> >>  board/omap3/devkit8000/devkit8000.h |  373 +++++++++++++++++++++++++++++++++++
> > no need board are allow in board/omap3
> > please create your own vendor dirent or just put it in board/
> What do you mean with that?
board/devkit8000/devkit8000.h
or board/embedinfo/devkit8000/devkit8000.h

I'm confused, where am I supposed to use omap3 and where not?