[U-Boot] [PATCH 1/2] driver/fsl_pci: Added fsl_pci_init_port function to initialize a single PCIe port.

[Poonam Aggrwal]

*  Added a generic function fsl_pci_init_port in drivers/pci/fsl_pci.c
   to initialize a PCIe port.
*  fsl_pci_init_port can be called from board specific pcie initialization
   routine, per-port. 
*  This will reduce the code redundancy in the most of the Freescale board
   specific PCIe inits.
*  All the FSL 85xx boards can use it for PCIe initialization.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
- applies on git.denx.de/u-boot-mpc85xx.git branch->next
- next patch following it makes use of this patch for PCIe initialization
  on P1&P2 RDB
 drivers/pci/fsl_pci_init.c |   41 +++++++++++++++++++++++++++++++++++++++++
 include/asm-ppc/fsl_pci.h  |   26 ++++++++++++++++++++++++++
 2 files changed, 67 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index ee89aaa..9e9e1b7 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -412,6 +412,47 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
 	}
 }
 
+int fsl_pci_init_port(struct fsl_pci_info *pci_info,
+				struct pci_controller *hose, int busno)
+{
+	volatile ccsr_fsl_pci_t *pci;
+	struct pci_region *r;
+
+	pci = (ccsr_fsl_pci_t *) pci_info->regs;
+
+	if (in_be32(&pci->pme_msg_det)) {
+		out_be32(&pci->pme_msg_det, 0xffffffff);
+		debug (" with errors.  Clearing.  Now 0x%08x",
+			pci->pme_msg_det);
+	}
+
+	r = hose->regions + hose->region_count;
+
+	/* outbound memory */
+	pci_set_region(r++,
+			pci_info->mem_bus,
+			pci_info->mem_phys,
+			pci_info->mem_size,
+			PCI_REGION_MEM);
+
+	/* outbound io */
+	pci_set_region(r++,
+			pci_info->io_bus,
+			pci_info->io_phys,
+			pci_info->io_size,
+			PCI_REGION_IO);
+
+	hose->region_count = r - hose->regions;
+	hose->first_busno = busno;
+
+	fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
+
+	printf("\n    PCIE%x on bus %02x - %02x\n", pci_info->pci_num,
+			hose->first_busno, hose->last_busno);
+
+	return(hose->last_busno + 1);
+}
+
 /* Enable inbound PCI config cycles for agent/endpoint interface */
 void fsl_pci_config_unlock(struct pci_controller *hose)
 {
diff --git a/include/asm-ppc/fsl_pci.h b/include/asm-ppc/fsl_pci.h
index b2ff0e9..2b6421a 100644
--- a/include/asm-ppc/fsl_pci.h
+++ b/include/asm-ppc/fsl_pci.h
@@ -154,4 +154,30 @@ typedef struct ccsr_pci {
 	char	res24[252];
 } ccsr_fsl_pci_t;
 
+struct fsl_pci_info {
+	phys_size_t	regs;
+	pci_addr_t	mem_bus;
+	phys_size_t	mem_phys;
+	pci_size_t	mem_size;
+	pci_addr_t	io_bus;
+	phys_size_t	io_phys;
+	pci_size_t	io_size;
+	int		pci_num;
+};
+
+int fsl_pci_init_port(struct fsl_pci_info *pci_info,
+				struct pci_controller *hose, int busno);
+
+#define SET_STD_PCIE_INFO(x, num) \
+{			\
+	x.regs = CONFIG_SYS_PCIE##num##_ADDR;	\
+	x.mem_bus = CONFIG_SYS_PCIE##num##_MEM_BUS; \
+	x.mem_phys = CONFIG_SYS_PCIE##num##_MEM_PHYS; \
+	x.mem_size = CONFIG_SYS_PCIE##num##_MEM_SIZE; \
+	x.io_bus = CONFIG_SYS_PCIE##num##_IO_BUS; \
+	x.io_phys = CONFIG_SYS_PCIE##num##_IO_PHYS; \
+	x.io_size = CONFIG_SYS_PCIE##num##_IO_SIZE; \
+	x.pci_num = num; \
+}
+
 #endif
-- 
1.5.6.5