[U-Boot] Kirkwood / Sheevaplug build failure

[rektide]

Hello everyone;

I'm new to U-Boot, but I hope you can help.  I'm trying to build the
Sheevaplug board / Kirkwood mach-- an ARM system-- and getting a
greviously long list of "undefined reference" errors towards what
looks like the end of the build cycle.

I'm attempting to use Emdebian's cross compiler arm-linux-gnueabi-gcc,
which is presently version 4.3.2.  To do this, I am doing: export
CROSS_COMPILE=arm-linux-gnueabi

After that, I do make sheevaplug_config, and then make.  After quite a
bit of compiling, I get the following:

make[1]: Leaving directory `/home/rektide/projects/u-boot/cpu/arm926ejs'
arm-linux-gnueabi-gcc -E -g  -Os   -fno-strict-aliasing  -fno-common
-ffixed-r8 -msoft-float  -D__KERNEL__ -DTEXT_BASE=0x00600000
-I/home/rektide/projects/u-boot/include -fno-builtin -ffreestanding
-nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.3.2/include -pipe
-DCONFIG_ARM -D__ARM__ -marm  -mabi=aapcs-linux -mno-thumb-interwork
-march=armv5te -include
/home/rektide/projects/u-boot/include/u-boot/u-boot.lds.h  -ansi
-D__ASSEMBLY__ -P -
</home/rektide/projects/u-boot/cpu/arm926ejs/u-boot.lds >u-boot.lds
UNDEF_SYM=`arm-linux-gnueabi-objdump -x
board/Marvell/sheevaplug/libsheevaplug.a lib_generic/libgeneric.a
lib_generic/lzma/liblzma.a lib_generic/lzo/liblzo.a
cpu/arm926ejs/libarm926ejs.a cpu/arm926ejs/kirkwood/libkirkwood.a
lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a
fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a
fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a fs/ubifs/libubifs.a
net/libnet.a disk/libdisk.a drivers/bios_emulator/libatibiosemu.a
drivers/block/libblock.a drivers/dma/libdma.a drivers/fpga/libfpga.a
drivers/gpio/libgpio.a drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a
drivers/input/libinput.a drivers/misc/libmisc.a drivers/mmc/libmmc.a
drivers/mtd/libmtd.a drivers/mtd/nand/libnand.a
drivers/mtd/onenand/libonenand.a drivers/mtd/ubi/libubi.a
drivers/mtd/spi/libspi_flash.a drivers/net/libnet.a
drivers/net/phy/libphy.a drivers/net/sk98lin/libsk98lin.a
drivers/pci/libpci.a drivers/pcmcia/libpcmcia.a
drivers/power/libpower.a drivers/spi/libspi.a drivers/rtc/librtc.a
drivers/serial/libserial.a drivers/twserial/libtws.a
drivers/usb/gadget/libusb_gadget.a drivers/usb/host/libusb_host.a
drivers/usb/musb/libusb_musb.a drivers/video/libvideo.a
drivers/watchdog/libwatchdog.a common/libcommon.a libfdt/libfdt.a
api/libapi.a post/libpost.a | sed  -n -e
's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`; cd
/home/rektide/projects/u-boot && arm-linux-gnueabi-ld -Bstatic -T
u-boot.lds  -Ttext 0x00600000 $UNDEF_SYM cpu/arm926ejs/start.o
--start-group lib_generic/libgeneric.a lib_generic/lzma/liblzma.a
lib_generic/lzo/liblzo.a cpu/arm926ejs/libarm926ejs.a
cpu/arm926ejs/kirkwood/libkirkwood.a lib_arm/libarm.a
fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a
fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
fs/yaffs2/libyaffs2.a fs/ubifs/libubifs.a net/libnet.a disk/libdisk.a
drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a
drivers/dma/libdma.a drivers/fpga/libfpga.a drivers/gpio/libgpio.a
drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a drivers/input/libinput.a
drivers/misc/libmisc.a drivers/mmc/libmmc.a drivers/mtd/libmtd.a
drivers/mtd/nand/libnand.a drivers/mtd/onenand/libonenand.a
drivers/mtd/ubi/libubi.a drivers/mtd/spi/libspi_flash.a
drivers/net/libnet.a drivers/net/phy/libphy.a
drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a
drivers/pcmcia/libpcmcia.a drivers/power/libpower.a
drivers/spi/libspi.a drivers/rtc/librtc.a drivers/serial/libserial.a
drivers/twserial/libtws.a drivers/usb/gadget/libusb_gadget.a
drivers/usb/host/libusb_host.a drivers/usb/musb/libusb_musb.a
drivers/video/libvideo.a drivers/watchdog/libwatchdog.a
common/libcommon.a libfdt/libfdt.a api/libapi.a post/libpost.a
board/Marvell/sheevaplug/libsheevaplug.a --end-group
/home/rektide/projects/u-boot/lib_arm/eabi_compat.o -L
/usr/lib/gcc/arm-linux-gnueabi/4.3.2 -lgcc -Map u-boot.map -o u-boot
lib_arm/libarm.a(board.o): In function `start_armboot':
/home/rektide/projects/u-boot/lib_arm/board.c:365: undefined reference
to `nand_init'
lib_arm/libarm.a(board.o):(.data+0xc): undefined reference to `env_init'
lib_arm/libarm.a(board.o):(.data+0x14): undefined reference to `serial_init'
net/libnet.a(eth.o): In function `eth_initialize':
/home/rektide/projects/u-boot/net/eth.c:198: undefined reference to
`miiphy_init'
net/libnet.a(net.o): In function `NetReceive':
/home/rektide/projects/u-boot/net/net.c:1473: undefined reference to
`nc_input_packet'
net/libnet.a(net.o): In function `NetLoop':
/home/rektide/projects/u-boot/net/net.c:425: undefined reference to `NcStart'
common/libcommon.a(cmd_bootm.o): In function `do_bootm':
/home/rektide/projects/u-boot/common/cmd_bootm.c:611: undefined
reference to `usb_stop'
common/libcommon.a(cmd_load.o): In function `do_load_serial_bin':
/home/rektide/projects/u-boot/common/cmd_load.c:470: undefined
reference to `serial_setbrg'
/home/rektide/projects/u-boot/common/cmd_load.c:508: undefined
reference to `serial_setbrg'
common/libcommon.a(cmd_nand.o): In function `nand_print_info':
/home/rektide/projects/u-boot/common/cmd_nand.c:214: undefined
reference to `nand_info'
common/libcommon.a(cmd_nand.o): In function `arg_off_size':
/home/rektide/projects/u-boot/common/cmd_nand.c:148: undefined
reference to `nand_curr_device'
common/libcommon.a(cmd_nand.o): In function `nand_load_image':
/home/rektide/projects/u-boot/common/cmd_nand.c:534: undefined
reference to `nand_read_skip_bad'
/home/rektide/projects/u-boot/common/cmd_nand.c:566: undefined
reference to `nand_read_skip_bad'
common/libcommon.a(cmd_nand.o): In function `do_nandboot':
/home/rektide/projects/u-boot/common/cmd_nand.c:683: undefined
reference to `nand_info'
common/libcommon.a(cmd_nand.o): In function `do_nand':
/home/rektide/projects/u-boot/common/cmd_nand.c:348: undefined
reference to `nand_erase_opts'
/home/rektide/projects/u-boot/common/cmd_nand.c:387: undefined
reference to `nand_read_skip_bad'
/home/rektide/projects/u-boot/common/cmd_nand.c:390: undefined
reference to `nand_write_skip_bad'
/home/rektide/projects/u-boot/common/cmd_nand.c:486: undefined
reference to `nand_info'
/home/rektide/projects/u-boot/common/cmd_nand.c:486: undefined
reference to `nand_curr_device'
common/libcommon.a(cmd_nvedit.o): In function `do_saveenv':
/home/rektide/projects/u-boot/common/cmd_nvedit.c:566: undefined
reference to `saveenv'
/home/rektide/projects/u-boot/common/cmd_nvedit.c:567: undefined
reference to `env_name_spec'
common/libcommon.a(cmd_nvedit.o): In function `_do_setenv':
/home/rektide/projects/u-boot/common/cmd_nvedit.c:286: undefined
reference to `serial_setbrg'
common/libcommon.a(console.o): In function `puts':
/home/rektide/projects/u-boot/common/console.c:366: undefined
reference to `serial_puts'
common/libcommon.a(console.o): In function `serial_printf':
/home/rektide/projects/u-boot/common/console.c:222: undefined
reference to `serial_puts'
common/libcommon.a(console.o): In function `putc':
/home/rektide/projects/u-boot/common/console.c:345: undefined
reference to `serial_putc'
common/libcommon.a(console.o): In function `tstc':
/home/rektide/projects/u-boot/common/console.c:325: undefined
reference to `serial_tstc'
common/libcommon.a(console.o): In function `getc':
/home/rektide/projects/u-boot/common/console.c:309: undefined
reference to `serial_getc'
common/libcommon.a(env_common.o): In function `env_get_char_init':
/home/rektide/projects/u-boot/common/env_common.c:154: undefined
reference to `env_get_char_spec'
common/libcommon.a(env_common.o): In function `env_crc_update':
/home/rektide/projects/u-boot/common/env_common.c:145: undefined
reference to `env_ptr'
common/libcommon.a(env_common.o): In function `set_default_env':
/home/rektide/projects/u-boot/common/env_common.c:223: undefined
reference to `env_ptr'
common/libcommon.a(env_common.o): In function `env_relocate':
/home/rektide/projects/u-boot/common/env_common.c:259: undefined
reference to `env_relocate_spec'
/home/rektide/projects/u-boot/common/env_common.c:266: undefined
reference to `env_ptr'
common/libcommon.a(stdio.o): In function `stdio_init':
/home/rektide/projects/u-boot/common/stdio.c:244: undefined reference
to `drv_nc_init'
/home/rektide/projects/u-boot/common/stdio.c:251: undefined reference
to `serial_putc'
/home/rektide/projects/u-boot/common/stdio.c:251: undefined reference
to `serial_puts'
/home/rektide/projects/u-boot/common/stdio.c:251: undefined reference
to `serial_getc'
/home/rektide/projects/u-boot/common/stdio.c:251: undefined reference
to `serial_tstc'
/home/rektide/projects/u-boot/board/Marvell/sheevaplug/sheevaplug.c:130:
undefined reference to `miiphy_set_current_dev'
/home/rektide/projects/u-boot/board/Marvell/sheevaplug/sheevaplug.c:134:
undefined reference to `miiphy_read'
/home/rektide/projects/u-boot/board/Marvell/sheevaplug/sheevaplug.c:144:
undefined reference to `miiphy_write'
/home/rektide/projects/u-boot/board/Marvell/sheevaplug/sheevaplug.c:145:
undefined reference to `miiphy_read'
/home/rektide/projects/u-boot/board/Marvell/sheevaplug/sheevaplug.c:147:
undefined reference to `miiphy_write'
/home/rektide/projects/u-boot/board/Marvell/sheevaplug/sheevaplug.c:148:
undefined reference to `miiphy_write'
/home/rektide/projects/u-boot/board/Marvell/sheevaplug/sheevaplug.c:151:
undefined reference to `miiphy_reset'
cpu/arm926ejs/kirkwood/libkirkwood.a(cpu.o): In function `cpu_eth_init':
/home/rektide/projects/u-boot/cpu/arm926ejs/kirkwood/cpu.c:308:
undefined reference to `kirkwood_egiga_initialize'
cpu/arm926ejs/kirkwood/libkirkwood.a(cpu.o): In function `get_random_hex':
/home/rektide/projects/u-boot/cpu/arm926ejs/kirkwood/cpu.c:65:
undefined reference to `md5'
make: *** [u-boot] Error 1
rektide at thoth:~/projects/u-boot$
rektide at thoth:~/projects/u-boot$ arm-linux-gnueabi-gcc -v
Using built-in specs.
Target: arm-linux-gnueabi
Configured with: ../src/configure -v --with-pkgversion='Debian
4.3.2-1.1' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs
--enable-languages=c,c++,obj-c++ --prefix=/usr --enable-shared
--with-system-zlib --libexecdir=/usr/lib --without-included-gettext
--enable-threads=posix --enable-nls
--with-gxx-include-dir=/usr/arm-linux-gnueabi/include/c++/4.3.2
--program-suffix=-4.3 --enable-clocale=gnu --enable-libstdcxx-debug
--disable-libssp --disable-sjlj-exceptions --enable-checking=release
--program-prefix=arm-linux-gnueabi-
--includedir=/usr/arm-linux-gnueabi/include --build=x86_64-linux-gnu
--host=x86_64-linux-gnu --target=arm-linux-gnueabi
Thread model: posix
gcc version 4.3.2 (Debian 4.3.2-1.1)



Long log dump, yes, sorry, but I feel like theres got to be a missing
lynchpin and this will all slide together nicely afterwords.

Thank you for your consideration & attention;
-rektide