[U-Boot] ARM pull request
Wolfgang Denk
wd at denx.de
Tue Dec 1 12:13:22 CET 2009
Dear Tom,
In message <4B131A4D.1000309 at windriver.com> you wrote:
> Wolfgang,
> I have rebased the arm/next against your next branch.
> The result is in arm/next-sync and arm/next
> Either is fine if you pull soon.
> Else use next-sync.
>
> The outstanding issues with arm/next are
> overo and beagle have reported memory problems related to the OMAP3:SDRC changes
> onenand build failures reported on friday.
>
> Tom
>
> The following changes since commit 2f6f67da1b98b6d1dad2d80bc4e472c3bff3cd5a:
> Wolfgang Denk (1):
> Merge branch 'next' of git://www.denx.de/git/u-boot-ppc4xx into next
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm next
>
> Grazvydas Ignotas (1):
> OMAP3: pandora: fix booting without serial attached
>
> Jean-Christophe PLAGNIOL-VILLARD (1):
> avr32/hsdramc: Move conditional compilation to Makefile
>
> Mark Asselstine (1):
> sheevaplug: correct SDRAM address control register
>
> Minkyu Kang (2):
> s3c64xx: move s3c64xx header files to asm-arm/arch-s3c64xx
> s5pc1xx: serial: fix the error check logic
>
> Nick Thompson (3):
> TI Davinci timer.c: Remove volatiles and memory mapped structures
> TI Davinci: add a pin multiplexer configuration API
> Add TI DA8xx support: DA8xx includes
>
> Nishanth Menon (3):
> OMAP3:SDRC: Cleanup references to SDP
> OMAP3:SDRC: introduce DDR types
> OMAP3: Fix SDRC init
>
> Po-Yu Chuang (2):
> arm: A320: driver for FTRTC010 real time clock
> arm: A320: Add support for Faraday A320 evaluation board
>
> Sandeep Paulraj (4):
> Fix for Void function returning value in sbc35-a9g20
> TI DaVinci DM646x: Enable NAND on DM6467 EVM
> NAND: Add config option for imx27lite
> TI DaVinci: Adding a README for the DaVinci series of SOC's
>
> Sekhar Nori (3):
> TI DA8xx: Add DA8xx cpu functions
> TI DA8xx: Add new directory for da830evm board
> TI DA8xx: Integrate DA830 EVM support into U-Boot
>
> Seunghyeon Rhee (1):
> S3C6400/SMDK6400: fix stack_setup in start.S
>
> Tom Rix (3):
> ARM Update mach-types.h
> ARM Update mach-types
> ARM Update mach-types
Why is this 3 commits? One should be enough...
> Vaibhav Hiremath (1):
> omap3_mmc: Encapsulate twl4030 under option CONFIG_TWL4030_POWER
>
> kevin.morfitt at fearnside-systems.co.uk (3):
> Move s3c24x0 header files to asm-arm/arch-s3c24x0/
> Clean-up of s3c24x0 header files
> Add a unified s3c24x0 header file
>
> MAINTAINERS | 8 +
> MAKEALL | 2 +
> Makefile | 6 +
> board/Marvell/sheevaplug/kwbimage.cfg | 10 +-
> board/davinci/common/misc.c | 48 +-
> board/davinci/common/misc.h | 12 +
> board/davinci/da830evm/Makefile | 51 +
> board/davinci/da830evm/config.mk | 43 +
> board/davinci/da830evm/da830evm.c | 127 ++
> board/davinci/dm6467evm/dm6467evm.c | 11 +
> board/faraday/a320evb/Makefile | 51 +
> board/faraday/a320evb/a320evb.c | 73 +
> board/faraday/a320evb/config.mk | 35 +
> board/faraday/a320evb/lowlevel_init.S | 118 ++
> board/mpl/vcma9/vcma9.c | 2 +-
> board/mpl/vcma9/vcma9.h | 16 +-
> board/pandora/pandora.h | 3 +-
> board/samsung/smdk2400/smdk2400.c | 2 +-
> board/samsung/smdk2410/smdk2410.c | 2 +-
> board/samsung/smdk6400/lowlevel_init.S | 2 +-
> board/samsung/smdk6400/smdk6400.c | 2 +-
> board/sbc2410x/sbc2410x.c | 2 +-
> board/trab/cmd_trab.c | 2 +-
> board/trab/rs485.c | 2 +-
> board/trab/rs485.h | 2 +-
> board/trab/trab.c | 2 +-
> board/trab/trab_fkt.c | 2 +-
> board/trab/tsc2000.c | 2 +-
> board/trab/vfd.c | 2 +-
> cpu/arm1176/cpu.c | 2 +-
> cpu/arm1176/s3c64xx/cpu_init.S | 2 +-
> cpu/arm1176/s3c64xx/reset.S | 2 +-
> cpu/arm1176/s3c64xx/speed.c | 2 +-
> cpu/arm1176/s3c64xx/timer.c | 2 +-
> cpu/arm1176/start.S | 9 +-
> cpu/arm920t/a320/Makefile | 47 +
> cpu/arm920t/a320/ftsmc020.c | 51 +
> cpu/arm920t/a320/reset.S | 22 +
> cpu/arm920t/a320/timer.c | 193 +++
> cpu/arm920t/s3c24x0/interrupts.c | 6 +-
> cpu/arm920t/s3c24x0/speed.c | 13 +-
> cpu/arm920t/s3c24x0/timer.c | 15 +-
> cpu/arm920t/s3c24x0/usb.c | 17 +-
> cpu/arm920t/s3c24x0/usb_ohci.c | 11 +-
> cpu/arm920t/start.S | 4 +-
> cpu/arm926ejs/davinci/cpu.c | 50 +-
> cpu/arm926ejs/davinci/psc.c | 43 +-
> cpu/arm926ejs/davinci/timer.c | 28 +-
> cpu/arm_cortexa8/omap3/mem.c | 5 +-
> cpu/arm_cortexa8/omap3/sys_info.c | 2 +-
> cpu/at32ap/Makefile | 2 +-
> cpu/at32ap/hsdramc.c | 3 -
> doc/README.davinci | 116 ++
> drivers/i2c/s3c24x0_i2c.c | 6 +-
> drivers/mmc/omap3_mmc.c | 2 +
> drivers/mtd/nand/s3c2410_nand.c | 2 +-
> drivers/mtd/nand/s3c64xx.c | 2 +-
> drivers/rtc/Makefile | 1 +
> drivers/rtc/ftrtc010.c | 124 ++
> drivers/rtc/m41t94.c | 1 -
> drivers/rtc/s3c24x0_rtc.c | 6 +-
> drivers/serial/s3c64xx.c | 2 +-
> drivers/serial/serial_s3c24x0.c | 6 +-
> drivers/serial/serial_s5pc1xx.c | 24 +-
> drivers/usb/host/ohci-hcd.c | 3 +-
> drivers/usb/host/s3c64xx-hcd.c | 2 +-
> include/asm-arm/arch-a320/a320.h | 35 +
> include/asm-arm/arch-a320/ftpmu010.h | 146 ++
> include/asm-arm/arch-a320/ftsdmc020.h | 103 ++
> include/asm-arm/arch-a320/ftsmc020.h | 79 +
> include/asm-arm/arch-a320/fttmr010.h | 73 +
> include/asm-arm/arch-davinci/hardware.h | 237 +++
> include/asm-arm/arch-davinci/i2c_defs.h | 5 +
> include/asm-arm/arch-omap3/cpu.h | 1 +
> include/asm-arm/arch-omap3/mem.h | 98 +-
> include/{ => asm-arm/arch-s3c24x0}/s3c2400.h | 18 +-
> include/{ => asm-arm/arch-s3c24x0}/s3c2410.h | 19 +-
> include/asm-arm/arch-s3c24x0/s3c24x0.h | 652 +++++++++
> include/asm-arm/arch-s3c24x0/s3c24x0_cpu.h | 27 +
> include/{ => asm-arm/arch-s3c64xx}/s3c6400.h | 0
> include/{ => asm-arm/arch-s3c64xx}/s3c64x0.h | 0
> include/asm-arm/mach-types.h | 1976 +++++++++++++++++++++++++-
> include/common.h | 8 +-
> include/configs/VCMA9.h | 7 +-
> include/configs/a320evb.h | 222 +++
> include/configs/da830evm.h | 243 ++++
> include/configs/devkit8000.h | 3 +
> include/configs/imx27lite.h | 1 +
> include/configs/omap3_beagle.h | 3 +
> include/configs/omap3_evm.h | 3 +
> include/configs/omap3_overo.h | 3 +
> include/configs/omap3_pandora.h | 3 +
> include/configs/omap3_sdp3430.h | 3 +
> include/configs/omap3_zoom1.h | 3 +
> include/configs/omap3_zoom2.h | 3 +
> include/configs/sbc2410x.h | 7 +-
> include/configs/smdk2400.h | 7 +-
> include/configs/smdk2410.h | 7 +-
> include/configs/smdk6400.h | 2 -
> include/configs/trab.h | 9 +-
> include/s3c24x0.h | 656 ---------
> 101 files changed, 5259 insertions(+), 871 deletions(-)
> create mode 100644 board/davinci/da830evm/Makefile
> create mode 100644 board/davinci/da830evm/config.mk
> create mode 100644 board/davinci/da830evm/da830evm.c
> create mode 100644 board/faraday/a320evb/Makefile
> create mode 100644 board/faraday/a320evb/a320evb.c
> create mode 100644 board/faraday/a320evb/config.mk
> create mode 100644 board/faraday/a320evb/lowlevel_init.S
> create mode 100644 cpu/arm920t/a320/Makefile
> create mode 100644 cpu/arm920t/a320/ftsmc020.c
> create mode 100644 cpu/arm920t/a320/reset.S
> create mode 100644 cpu/arm920t/a320/timer.c
> create mode 100644 doc/README.davinci
> create mode 100644 drivers/rtc/ftrtc010.c
> create mode 100644 include/asm-arm/arch-a320/a320.h
> create mode 100644 include/asm-arm/arch-a320/ftpmu010.h
> create mode 100644 include/asm-arm/arch-a320/ftsdmc020.h
> create mode 100644 include/asm-arm/arch-a320/ftsmc020.h
> create mode 100644 include/asm-arm/arch-a320/fttmr010.h
> rename include/{ => asm-arm/arch-s3c24x0}/s3c2400.h (98%)
> rename include/{ => asm-arm/arch-s3c24x0}/s3c2410.h (98%)
> create mode 100644 include/asm-arm/arch-s3c24x0/s3c24x0.h
> create mode 100644 include/asm-arm/arch-s3c24x0/s3c24x0_cpu.h
> rename include/{ => asm-arm/arch-s3c64xx}/s3c6400.h (100%)
> rename include/{ => asm-arm/arch-s3c64xx}/s3c64x0.h (100%)
> create mode 100644 include/configs/a320evb.h
> create mode 100644 include/configs/da830evm.h
> delete mode 100644 include/s3c24x0.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
ACHTUNG!!!
Das machine is nicht fur gefingerpoken und mittengrabben. Ist easy
schnappen der springenwerk, blowenfusen und corkenpoppen mit spitzen-
sparken. Ist nicht fur gewerken by das dummkopfen. Das rubbernecken
sightseeren keepen hands in das pockets. Relaxen und vatch das
blinkenlights!!!
More information about the U-Boot
mailing list