[U-Boot] [PATCH V3 2/9] video: add amba-clcd prime-cell

[Alessandro Rubini]

From: Alessandro Rubini <rubini at unipv.it>

This adds support for the CLCD logic cell. It accepts precompiled
register values for specific configuration through a board-supplied
data structure.  It is used by the Nomadik nhk8815, added by a later
patch in this series.

Signed-off-by: Alessandro Rubini <rubini at unipv.it>
Acked-by: Andrea Gallo <andrea.gallo at stericsson.com>
---
 drivers/video/Makefile |    1 +
 drivers/video/amba.c   |   79 ++++++++++++++++++++++++++++++++++++++++++++++++
 include/amba_clcd.h    |   77 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 157 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/amba.c
 create mode 100644 include/amba_clcd.h

diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index bb6b5a0..a5e339a 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -29,6 +29,7 @@ COBJS-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o
 COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
 COBJS-$(CONFIG_CFB_CONSOLE) += cfb_console.o
 COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
+COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
 COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o
 COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o
 COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o
diff --git a/drivers/video/amba.c b/drivers/video/amba.c
new file mode 100644
index 0000000..ffa1c39
--- /dev/null
+++ b/drivers/video/amba.c
@@ -0,0 +1,79 @@
+/*
+ * Driver for AMBA PrimeCell CLCD
+ *
+ * Copyright (C) 2009 Alessandro Rubini
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <lcd.h>
+#include <amba_clcd.h>
+
+/* These variables are required by lcd.c -- although it sets them by itself */
+int lcd_line_length;
+int lcd_color_fg;
+int lcd_color_bg;
+void *lcd_base;
+void *lcd_console_address;
+short console_col;
+short console_row;
+
+/*
+ * To use this driver you need to provide the following in board files:
+ *	a panel_info definition
+ *	an lcd_enable function (can't define a weak default with current code)
+ */
+
+/* There is nothing to do with color registers, we use true color */
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
+{
+	return;
+}
+
+/* Low level initialization of the logic cell: depends on panel_info */
+void lcd_ctrl_init(void *lcdbase)
+{
+	struct clcd_config *config;
+	struct clcd_registers *regs;
+	u32 cntl;
+
+	config = panel_info.priv;
+	regs = config->address;
+	cntl = config->cntl & ~CNTL_LCDEN;
+
+	/* Lazily, just copy the registers over: first control with disable */
+	writel(cntl, &regs->cntl);
+
+	writel(config->tim0, &regs->tim0);
+	writel(config->tim1, &regs->tim1);
+	writel(config->tim2, &regs->tim2);
+	writel(config->tim3, &regs->tim3);
+	writel((u32)lcdbase, &regs->ubas);
+	/* finally, enable */
+	writel(cntl | CNTL_LCDEN, &regs->cntl);
+}
+
+/* This is trivial, and copied from atmel_lcdfb.c */
+ulong calc_fbsize(void)
+{
+	return ((panel_info.vl_col * panel_info.vl_row *
+		NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
+}
diff --git a/include/amba_clcd.h b/include/amba_clcd.h
new file mode 100644
index 0000000..db80517
--- /dev/null
+++ b/include/amba_clcd.h
@@ -0,0 +1,77 @@
+/*
+ * Register definitions for the AMBA CLCD logic cell.
+ *
+ * derived from David A Rusling, although rearranged as a C structure
+ *     linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
+ *
+ * Copyright (C) 2001 ARM Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * CLCD Controller Internal Register addresses
+ */
+struct clcd_registers {
+	u32 tim0;	/* 0x00 */
+	u32 tim1;
+	u32 tim2;
+	u32 tim3;
+	u32 ubas;	/* 0x10 */
+	u32 lbas;
+#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW)
+	u32 ienb;
+	u32 cntl;
+#else /* Someone rearranged these two registers on the Versatile */
+	u32 cntl;
+	u32 ienb;
+#endif
+	u32 stat;	/* 0x20 */
+	u32 intr;
+	u32 ucur;
+	u32 lcur;
+	u32 unused[0x74];	/* 0x030..0x1ff */
+	u32 palette[0x80];	/* 0x200..0x3ff */
+};
+
+/* Bit definition for TIM2 */
+#define TIM2_CLKSEL		(1 << 5)
+#define TIM2_IVS		(1 << 11)
+#define TIM2_IHS		(1 << 12)
+#define TIM2_IPC		(1 << 13)
+#define TIM2_IOE		(1 << 14)
+#define TIM2_BCD		(1 << 26)
+
+/* Bit definitions for control register */
+#define CNTL_LCDEN		(1 << 0)
+#define CNTL_LCDBPP1		(0 << 1)
+#define CNTL_LCDBPP2		(1 << 1)
+#define CNTL_LCDBPP4		(2 << 1)
+#define CNTL_LCDBPP8		(3 << 1)
+#define CNTL_LCDBPP16		(4 << 1)
+#define CNTL_LCDBPP16_565	(6 << 1)
+#define CNTL_LCDBPP24		(5 << 1)
+#define CNTL_LCDBW		(1 << 4)
+#define CNTL_LCDTFT		(1 << 5)
+#define CNTL_LCDMONO8		(1 << 6)
+#define CNTL_LCDDUAL		(1 << 7)
+#define CNTL_BGR		(1 << 8)
+#define CNTL_BEBO		(1 << 9)
+#define CNTL_BEPO		(1 << 10)
+#define CNTL_LCDPWR		(1 << 11)
+#define CNTL_LCDVCOMP(x)	((x) << 12)
+#define CNTL_LDMAFIFOTIME	(1 << 15)
+#define CNTL_WATERMARK		(1 << 16)
+
+/* u-boot specific: information passed by the board file */
+struct clcd_config {
+	struct clcd_registers *address;
+	u32			tim0;
+	u32			tim1;
+	u32			tim2;
+	u32			tim3;
+	u32			cntl;
+	unsigned long		pixclock;
+};
-- 
1.6.0.2