[U-Boot] problem building fw_printenv

[twebb]

I'm having problems building fw_printenv.  I'm sure it's simple but
I'm just not getting it.

I'm working with u-boot 2009.01-rc1.  I have the environment variable
CROSS_COMPILE set, and then execute "make env" from the top of the
u-boot source tree.  Capture is below.  I don't had "stdint.h"
anywhere in my environment.  Any ideas what I have wrong?

Thanks,
twebb


jb at jb:u-boot-arm$
jb at jb:u-boot-arm$ echo $CROSS_COMPILE
arm-eabi-
jb at jb:u-boot-arm$
jb at jb:u-boot-arm$ make env
make -C tools/env all MTD_VERSION= || exit 1
make[1]: Entering directory `/home/jb/work-1130/boot/u-boot-arm/tools/env'
arm-eabi-gcc -Wall -DUSE_HOSTCC
-I/home/jb/work-1130/boot/u-boot-arm/include crc32.c  fw_env.c
fw_env_main.c -o fw_printenv
crc32.c:14:20: error: stdint.h: No such file or directory
crc32.c:81: error: expected '=', ',', ';', 'asm' or '__attribute__'
before 'crc_table'
crc32.c:157: error: expected '=', ',', ';', 'asm' or '__attribute__'
before 'crc32'
crc32.c:206: error: expected '=', ',', ';', 'asm' or '__attribute__'
before 'crc32_wd'
fw_env.c:27:19: error: errno.h: No such file or directory
fw_env.c:28:19: error: fcntl.h: No such file or directory
...