[U-Boot] Uboot hangs on "starting kernel..."

[Ben Warren]

Wierd O wrote:
> Hi all,
>  
> I was working on freescale imx27ads board. Uboot hangs on ' starting kernel...'
>  
> I would be grateful if you can shed a light on the problem.
>
> I used gcc-3.4.3 for cross compiling the image.
>
> Here is the log:
>
> U-Boot 2.0.0-rc3 (Mar 23 2009 - 13:30:42)
>
> Board: Freescale i.MX27
> phy0: Autonegotiation timeout
> phy0: Phyid 1: 7 Phyid 2: c0c4 LPA 1
> phy0: Link is down - 10/Half
>
> MPLL: 398 MHz, SPLL: 239 MHz, ARM: 265 MHz, AHB: 132 MHz, IPG: 66 MHz
> perclk1:   53199918 Hz
> perclk2:  265999593 Hz
> perclk3:   53199918 Hz
> perclk4:  265999593 Hz
> clkin26:   26000000 Hz
> Malloc Space: 0xa3b00000 -> 0xa3f00000 (size  4 MB)
> running /env/bin/init...
>
> Hit any key to stop autoboot:  0
>   Verifying Checksum ... OK
>   Image Name:   Linux-2.6.22.6
>   Created:      2009-12-08  14:52:27 UTC
>   Data Size:    1564480 Bytes =  1.5 MB
>   Load Address: a0008000
>   Entry Point:  a0008000
> OK
> commandline:
> console=ttymxc0,115200 mem=64M mtdparts=uboot:1M(boot),-(root)
> root=/dev/mmcblk0p1 rootdelay=1 rootfstype=ext2
> video=mxcfb:800x600,bpp=16,OSD080TN4x
>
> Starting kernel ...
>  
>  
>   
Please read the documentation.  Are you sure "console=ttymxc0" is correct?

regards,
Ben