[U-Boot] Problem with transparent PCI-PCI bridge on Canyonlands

[Felix Radensky]

Hi,

Feng Kan wrote:
> Can you turn on the additional debug information. That will give a
> better
> Clue as to what part is hanging.
>   

I've enabled debugging in drivers/pci/pci.c. I'm seeing an infinite flow 
of messages

PCI:   Bus Dev VenId DevId Class Int
PCI Scan: Found Bus 0, Device 6, Function 0
PCI Scan: Found Bus 1, Device 6, Function 0
...
PCI Scan: Found Bus 255, Device 6, Function 0
PCI Scan: Found Bus 0, Device 6, Function 0
PCI Scan: Found Bus 1, Device 6, Function 0
...

Felix.
> Feng Kan
> AMCC Software
>
> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> On Behalf Of Felix Radensky
> Sent: Wednesday, December 09, 2009 10:02 AM
> To: u-boot at lists.denx.de; Stefan Roese
> Subject: [U-Boot] Problem with transparent PCI-PCI bridge on Canyonlands
>
> Hi,
>
> I'm running latest u-boot on 1GHz Canyonlands board and have trouble
> using 64-bit transparent PCI-PCI PLX 6254 bridge. With PLX evaluation
> board plugged into Canyonlands PCI slot u-boot hangs. With PCI support
> disabled u-boot works fine. The PLX board is OK, it was recognized by
> both u-boot and kernel on Freescale MPC8536DS board. On Canyonlands
> linux-2.6.32 silently resets the board when PLX is plugged in. Any ideas
> what could be wrong in u-boot ? I'll post a separate question to 
> linuxppc-dev.
>
> U-Boot 2009.11-rc2-00002-g386118a (Dec 09 2009 - 18:48:44)
>
> CPU:   AMCC PowerPC 460EX Rev. A at 1000 MHz (PLB=200 OPB=100 EBC=100)
>        Security/Kasumi support
>        Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
>        Internal PCI arbiter enabled
>        32 kB I-Cache 32 kB D-Cache
> Board: Canyonlands - AMCC PPC460EX Evaluation Board, 2*PCIe, Rev. 14
> I2C:   ready
> DRAM:  512 MB (ECC not enabled, 400 MHz, CL3)
> FLASH: 64 MB
> NAND:  256 MiB
> PCI:   Bus Dev VenId DevId Class Int
>
>
> Thanks a lot.
>
> Felix.
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>