[U-Boot] [PATCH] imx51:Add support basic boot code of freescale imx51 bbg board

[Fred Fan]

HI Stefano Babic,
   Sorry, I just see your and wolfgang's mail. In this days, I am prepare
new soc's  kernel MSL code.
When I just finished my coding, I have same issue too. But during I identify
this issue, the issue is
disappeared.
   I does not change lowlevel_init.s. Maybe I removed some definitions of
clock register.
   I will check it ASAP.
   Best Regard
Fred


2009/12/4 Stefano Babic <sbabic at denx.de>

> Fred Fan wrote:
> > Dear wolfgang,
> >     I almost fixed all of your comments.
>
> Hi Fred,
>
> I have already tested your patch on the babbage2 board and I would ask
> you about the status. The boot loader does not start  (I have tried
> flashing the SPI NOR, and this seems ok. The code seems loaded from the
> flash) but the board hangs. With the debugger seems that it hangs in the
> init_clock assemby routine in lowlevel_init.S.
>
> Have you seen the same behavior or do you think it depens on my
> environment ?
>
> Regards,
> Stefano
>
> --
> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
> =====================================================================
>