[U-Boot] [PATCH] ppc4xx: Canyonlands: Fix USB host PHY reset sequence
Wolfgang Denk
wd at denx.de
Mon Dec 14 21:44:32 CET 2009
Dear Stefan,
In message <1260821359-8705-1-git-send-email-dmitchell at appliedmicro.com> Dave Mitchell wrote:
...
> --- a/board/amcc/canyonlands/canyonlands.c
> +++ b/board/amcc/canyonlands/canyonlands.c
> @@ -177,8 +177,11 @@ int board_early_init_f(void)
> /* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */
> out_8((void *)CONFIG_SYS_BCSR_BASE + 5, 0);
>
> - /* Enable USB host & USB-OTG */
> + /* Enable USB host & USB-OTG;force assert,then de-assert PHY reset */
> + out_8((void *)CONFIG_SYS_BCSR_BASE + 7, 1);
> + mdelay(100);
> out_8((void *)CONFIG_SYS_BCSR_BASE + 7, 0);
> + mdealy(100);
We should get rid of this "CONFIG_SYS_BCSR_BASE + offset" stuff and
use a proper C struct for this. What do you think?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Testing can show the presense of bugs, but not their absence.
-- Edsger Dijkstra
More information about the U-Boot
mailing list