[U-Boot] [PATCH] macb: Fix mii_phy_read and mii_phy_write functions
Semih Hazar
semih.hazar at indefia.com
Thu Dec 17 14:07:15 CET 2009
Enabling CONFIG_CMD_MII in AVR32 boards was not possible due to
compile errors.
This patch fixes miiphy_read and miiphy_write functions and
registers them properly.
Signed-off-by: Semih Hazar <semih.hazar at indefia.com>
---
drivers/net/macb.c | 110 +++++++++++++++------------------------------------
1 files changed, 33 insertions(+), 77 deletions(-)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 6de0a04..c74bee5 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -42,6 +42,7 @@
#include <net.h>
#include <netdev.h>
#include <malloc.h>
+#include <miiphy.h>
#include <linux/mii.h>
#include <asm/io.h>
@@ -164,6 +165,36 @@ static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
return MACB_BFEXT(DATA, frame);
}
+#if defined(CONFIG_CMD_MII)
+
+int macb_miiphy_read(char *devname, u8 phy_adr, u8 reg, u16 *value)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ struct macb_device *macb = to_macb(dev);
+
+ if ( macb->phy_addr != phy_adr )
+ return -1;
+
+ *value = macb_mdio_read(macb, reg);
+
+ return 0;
+}
+
+int macb_miiphy_write(char *devname, u8 phy_adr, u8 reg, u16 value)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ struct macb_device *macb = to_macb(dev);
+
+ if ( macb->phy_addr != phy_adr )
+ return -1;
+
+ macb_mdio_write(macb, reg, value);
+
+ return 0;
+}
+#endif
+
+
#if defined(CONFIG_CMD_NET)
static int macb_send(struct eth_device *netdev, volatile void *packet,
@@ -540,84 +571,9 @@ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
eth_register(netdev);
- return 0;
-}
-
-#endif
-
#if defined(CONFIG_CMD_MII)
-
-int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
-{
- unsigned long netctl;
- unsigned long netstat;
- unsigned long frame;
- int iflag;
-
- iflag = disable_interrupts();
- netctl = macb_readl(&macb, EMACB_NCR);
- netctl |= MACB_BIT(MPE);
- macb_writel(&macb, EMACB_NCR, netctl);
- if (iflag)
- enable_interrupts();
-
- frame = (MACB_BF(SOF, 1)
- | MACB_BF(RW, 2)
- | MACB_BF(PHYA, addr)
- | MACB_BF(REGA, reg)
- | MACB_BF(CODE, 2));
- macb_writel(&macb, EMACB_MAN, frame);
-
- do {
- netstat = macb_readl(&macb, EMACB_NSR);
- } while (!(netstat & MACB_BIT(IDLE)));
-
- frame = macb_readl(&macb, EMACB_MAN);
- *value = MACB_BFEXT(DATA, frame);
-
- iflag = disable_interrupts();
- netctl = macb_readl(&macb, EMACB_NCR);
- netctl &= ~MACB_BIT(MPE);
- macb_writel(&macb, EMACB_NCR, netctl);
- if (iflag)
- enable_interrupts();
-
- return 0;
-}
-
-int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
-{
- unsigned long netctl;
- unsigned long netstat;
- unsigned long frame;
- int iflag;
-
- iflag = disable_interrupts();
- netctl = macb_readl(&macb, EMACB_NCR);
- netctl |= MACB_BIT(MPE);
- macb_writel(&macb, EMACB_NCR, netctl);
- if (iflag)
- enable_interrupts();
-
- frame = (MACB_BF(SOF, 1)
- | MACB_BF(RW, 1)
- | MACB_BF(PHYA, addr)
- | MACB_BF(REGA, reg)
- | MACB_BF(CODE, 2)
- | MACB_BF(DATA, value));
- macb_writel(&macb, EMACB_MAN, frame);
-
- do {
- netstat = macb_readl(&macb, EMACB_NSR);
- } while (!(netstat & MACB_BIT(IDLE)));
-
- iflag = disable_interrupts();
- netctl = macb_readl(&macb, EMACB_NCR);
- netctl &= ~MACB_BIT(MPE);
- macb_writel(&macb, EMACB_NCR, netctl);
- if (iflag)
- enable_interrupts();
-
+ miiphy_register(netdev->name, macb_miiphy_read, macb_miiphy_write);
+#endif
return 0;
}
--
1.5.4.3
More information about the U-Boot
mailing list