[U-Boot] [PATCH 6/7] OMAP3: Add OMAP3 core changes for MUSB

[Dirk Behme]

OMAp3 core changes necessary for MUSB

Signed-off-by: Dirk Behme <dirk.behme at googlemail.com>

---
Note: OMAP3 USb code will be sent later to USB maintainer, so
      CONFIG_MUSB isn't used anywhere yet. This will avoid
      USB maintainer to change OMAP3 core files.

 cpu/arm_cortexa8/omap3/clock.c     |    5 +++++
 include/asm-arm/arch-omap3/cpu.h   |    2 ++
 include/asm-arm/arch-omap3/omap3.h |   11 +++++++++++
 3 files changed, 18 insertions(+)

Index: u-boot-main/cpu/arm_cortexa8/omap3/clock.c
===================================================================
--- u-boot-main.orig/cpu/arm_cortexa8/omap3/clock.c
+++ u-boot-main/cpu/arm_cortexa8/omap3/clock.c
@@ -377,5 +377,10 @@ void per_clocks_enable(void)
 	sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON);
 	sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON);
 
+#ifdef CONFIG_MUSB
+	/* Enable the MUSB interface clock */
+	sr32(&prcm_base->iclken1_core, 4, 1, 0x1);
+#endif
+
 	sdelay(1000);
 }
Index: u-boot-main/include/asm-arm/arch-omap3/cpu.h
===================================================================
--- u-boot-main.orig/include/asm-arm/arch-omap3/cpu.h
+++ u-boot-main/include/asm-arm/arch-omap3/cpu.h
@@ -432,4 +432,6 @@ typedef struct pm {
 #define I2C_BASE2		(OMAP34XX_CORE_L4_IO_BASE + 0x72000)
 #define I2C_BASE3		(OMAP34XX_CORE_L4_IO_BASE + 0x60000)
 
+#define UDC_BASE		(OMAP34XX_CORE_L4_IO_BASE + 0xAB000)
+
 #endif /* _CPU_H */
Index: u-boot-main/include/asm-arm/arch-omap3/omap3.h
===================================================================
--- u-boot-main.orig/include/asm-arm/arch-omap3/omap3.h
+++ u-boot-main/include/asm-arm/arch-omap3/omap3.h
@@ -3,6 +3,7 @@
  * Texas Instruments, <www.ti.com>
  * Richard Woodruff <r-woodruff2 at ti.com>
  * Syed Mohammed Khasim <x0khasim at ti.com>
+ * Atin Malaviya <atin.malaviya at gmail.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -200,6 +201,7 @@ typedef struct gpio {
 #define LEDBPWM			(0x1 << 5)
 
 /* I2C ID4 (slave4) register */
+#define PROTECT_KEY		0x44
 #define VAUX2_DEV_GRP		0x76
 #define VAUX2_DEDICATED		0x79
 #define VAUX3_DEV_GRP		0x7A
@@ -209,6 +211,15 @@ typedef struct gpio {
 #define VDAC_DEV_GRP		0x96
 #define VDAC_DEDICATED		0x99
 
+#define VUSB1V5_DEV_GRP		0xCC
+#define VUSB1V5_TYPE		0xCD
+#define VUSB1V8_DEV_GRP		0xCF
+#define VUSB1V8_TYPE		0xD0
+#define VUSB3V1_DEV_GRP		0xD2
+#define VUSB3V1_TYPE		0xD3
+#define VUSB_DEDICATED1		0xD8
+#define VUSB_DEDICATED2		0xD9
+
 #define DEV_GRP_P1		0x20
 #define DEV_GRP_ALL		0xE0