[U-Boot] U-Boot Hanging

[Feng Kan]

Hi  Afzal:
    Sounds like an issue where the fixed DRAM init did not work as it
should.
Try to pull the latest version of U-Boot, see if that helps. You may
want to pull
The latest from Stefan's tree as well.

Feng Kan
AMCC Software

-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
On Behalf Of Afzal Nadirshah
Sent: Tuesday, February 03, 2009 2:02 AM
To: u-boot at lists.denx.de
Subject: [U-Boot] U-Boot Hanging

Hi,
     I have compiled u-boot (for nand flash, using
canyonlands_nand_config) for the canyonlands board having a PPC460Ex. I
have flashed the u-boot-nand.bin to the NAND flash. When I boot from the
NAND flash the u-boot starts giving outputs onto minicom,  but it hangs
after just a few statements.


U-Boot 1.3.4-00380-g302e52e (Sep  8 2008 - 15:37:41)

CPU:   AMCC PowerPC 460EX Rev. A at 600 MHz (PLB=200, OPB=100, EBC=100
MHz)
       Security/Kasumi support
       Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
       Internal PCI arbiter disabled
       32 kB I-Cache 32 kB D-Cache
Board: Canyonlands - AMCC PPC460EX Evaluation Board, 2*PCIe, Rev. 16
I2C:   ready
DTT:   1 is 47 C
DRAM:  512 MB

Has anybody faced this issue?

Regards,
Afzal Nadirshah

________________________________
http://www.mindtree.com/email/disclaimer.html