[U-Boot] coldfire M5329EVB demo problem

[kescuin]

Yes, I've already read it.

When I have this one at the moment:

00020000 T hello_world
000200a8 T dummy
000200ac T get_version
000200c0 T getc
000200d4 T tstc
000200e8 T putc
000200fc T puts
00020110 T printf
00020124 T install_hdlr
00020138 T free_hdlr
0002014c T malloc
00020160 T free
00020174 T udelay
00020188 T get_timer
0002019c T vprintf
000201b0 T do_reset
000201c4 T getenv
000201d8 T setenv
000201ec T simple_strtoul
00020200 T simple_strtol
00020214 T strcmp
00020228 T i2c_write
0002023c T i2c_read
00020254 T app_startup
000222fc d _GLOBAL_OFFSET_TABLE_
00022344 A __bss_start
00022344 A _edata
00022344 A _end

Then I execute:

tftp 0x20000 hello_world.bin
go 0x20000 with the same result.

I've also tryed to change adress in make file in order to test de (tftp
0x40000 and go 0x40004) but i've never succeed.

On Wed, Feb 4, 2009 at 12:13 PM, Wolfgang Denk <wd at denx.de> wrote:

> Dear kescuin,
>
> In message <491c50e10902040143o7a545aa3sd2645fe0b8b31fba at mail.gmail.com>
> you wrote:
> >
> > I'm working wint an u-boot 2008.10 version over a Coldfire M5329EVB
> Board.
> > Every thing goes well on u-boot working. But when I try to execute
> > standalone applications i've got problems.
> ...
> > Any one have executed stand alone applications on this board? What should
> be
> > happening?
>
> Maybe you missed reading the FAQ? See
> http://www.denx.de/wiki/view/DULG/MyStandaloneProgramDoesNotWork
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Another megabytes the dust.
>