[U-Boot] can't update U-boot when booting with BDI2000

[Wolfgang Denk]

Dear hendrik,

In message <4989A792.2080503 at gmail.com> you wrote:
> 
> Im new to U-boot and need help. I am using U-boot-2009.10 and a MPC8548 
> board with 512MB DDR and 128Mb nor Flash(using cfi)
...
> I think the sram is mapped over the flash boot region and when i try to 
> erase and cp to the bootreagion the commands and date gets lost.  Can 
> anyone help me find the problem?

Fix your BDI2000 config file. Try and not map SRAM at all. Or simply
start the board using "reset run" so the init statements are not
executed.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Diplomacy is the art of saying "nice doggy" until you can find a rock.