[U-Boot] PATCH 2/8 Multi-adapter multi-bus I2C
ksi at koi8.net
ksi at koi8.net
Sat Feb 7 02:04:44 CET 2009
Signed-off-by: Sergey Kubushyn <ksi at koi8.net>
---
diff --git a/common/devices.c b/common/devices.c
index 38f1bbc..073d89b 100644
--- a/common/devices.c
+++ b/common/devices.c
@@ -1,4 +1,8 @@
/*
+ * Copyright (C) 2009 Sergey Kubushyn <ksi at koi8.net>
+ *
+ * Changes for multibus/multiadapter I2C support.
+ *
* (C) Copyright 2000
* Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio at tin.it
*
@@ -30,7 +34,7 @@
#ifdef CONFIG_LOGBUFFER
#include <logbuff.h>
#endif
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) || defined(CONFIG_SYS_I2C_ADAPTERS)
#include <i2c.h>
#endif
@@ -215,9 +219,15 @@ int devices_init (void)
/* Initialize the list */
INIT_LIST_HEAD(&(devs.list));
+#ifdef CONFIG_NEW_I2C
+#ifdef CONFIG_SYS_I2C_ADAPTERS
+ i2c_init_all();
+#endif
+#else
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
+#endif
#ifdef CONFIG_LCD
drv_lcd_init ();
#endif
diff --git a/cpu/mpc8xx/video.c b/cpu/mpc8xx/video.c
index 4a59927..5abb4fc 100644
--- a/cpu/mpc8xx/video.c
+++ b/cpu/mpc8xx/video.c
@@ -809,7 +809,11 @@ static void video_encoder_init (void)
/* Initialize the I2C */
debug ("[VIDEO ENCODER] Initializing I2C bus...\n");
+#ifdef CONFIG_NEW_I2C
+ i2c_init_all();
+#else
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
#ifdef CONFIG_FADS
/* Reset ADV7176 chip */
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index d753e9a..f6d38f1 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -174,7 +174,11 @@ dtt_init (void)
const char *const header = "DTT: ";
/* switch to correct I2C bus */
+#ifdef CONFIG_NEW_I2C
+ i2c_set_bus_num(CONFIG_SYS_DTT_BUS_NUM);
+#else
I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
+#endif
for (i = 0; i < sizeof(sensors); i++) {
if (_dtt_init(sensors[i]) != 0)
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 8119821..66d6865 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -156,8 +156,13 @@ int dtt_init (void)
int old_bus;
/* switch to correct I2C bus */
+#ifdef CONFIG_NEW_I2C
+ old_bus = i2c_get_bus_num();
+ i2c_set_bus_num(CONFIG_SYS_DTT_BUS_NUM);
+#else
old_bus = I2C_GET_BUS();
I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
+#endif
for (i = 0; i < sizeof(sensors); i++) {
if (_dtt_init(sensors[i]) != 0)
@@ -167,7 +172,11 @@ int dtt_init (void)
dtt_get_temp(sensors[i]));
}
/* switch back to original I2C bus */
+#ifdef CONFIG_NEW_I2C
+ i2c_set_bus_num(old_bus);
+#else
I2C_SET_BUS(old_bus);
+#endif
return (0);
} /* dtt_init() */
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 9c74657..095c6ee 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -33,6 +33,8 @@ COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
+COBJS-$(CONFIG_SM502_I2C) += sm502_i2c.o
+COBJS-$(CONFIG_NEW_I2C) += i2c_core.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index ce646fd..f7998e3 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -1,4 +1,8 @@
/*
+ * Copyright (c) 2009 Sergey Kubushyn <ksi at koi8.net>
+ *
+ * Changes for multibus/multiadapter I2C support.
+ *
* Copyright 2006 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
@@ -18,7 +22,7 @@
#include <common.h>
-#ifdef CONFIG_HARD_I2C
+#ifdef CONFIG_FSL_I2C
#include <command.h>
#include <i2c.h> /* Functional interface */
@@ -31,24 +35,15 @@
#define I2C_READ_BIT 1
#define I2C_WRITE_BIT 0
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
- * Default is bus 0. This is necessary because the DDR initialization
- * runs from ROM, and we can't switch buses because we can't modify
- * the global variables.
- */
-#ifndef CONFIG_SYS_SPD_BUS_NUM
-#define CONFIG_SYS_SPD_BUS_NUM 0
-#endif
-static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM;
+#define FSL_NAME(arg) "fsl_i2c@" MK_NAME(arg)
+#define MK_NAME(arg) #arg
-static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED};
+DECLARE_GLOBAL_DATA_PTR;
static const struct fsl_i2c *i2c_dev[2] = {
- (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET),
-#ifdef CONFIG_SYS_I2C2_OFFSET
- (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET)
+ (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C_OFFSET),
+#ifdef CONFIG_SYS_FSL_I2C2_OFFSET
+ (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C2_OFFSET)
#endif
};
@@ -126,6 +121,8 @@ static const struct {
#endif
};
+i2c_adap_t fsl_i2c_adap[];
+
/**
* Set the I2C bus speed for a given I2C device
*
@@ -169,43 +166,29 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev,
return speed;
}
-void
-i2c_init(int speed, int slaveadd)
+
+static void __i2c_init(int adap_no, int speed, int slaveadd)
{
- struct fsl_i2c *dev;
unsigned int temp;
- dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
-
- writeb(0, &dev->cr); /* stop I2C controller */
+ writeb(0, &i2c_dev[adap_no]->cr); /* stop I2C controller */
udelay(5); /* let it shutdown in peace */
- temp = set_i2c_bus_speed(dev, gd->i2c1_clk, speed);
- if (gd->flags & GD_FLG_RELOC)
- i2c_bus_speed[0] = temp;
- writeb(slaveadd << 1, &dev->adr); /* write slave address */
- writeb(0x0, &dev->sr); /* clear status register */
- writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */
-
-#ifdef CONFIG_SYS_I2C2_OFFSET
- dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET);
-
- writeb(0, &dev->cr); /* stop I2C controller */
- udelay(5); /* let it shutdown in peace */
- temp = set_i2c_bus_speed(dev, gd->i2c2_clk, speed);
- if (gd->flags & GD_FLG_RELOC)
- i2c_bus_speed[1] = temp;
- writeb(slaveadd << 1, &dev->adr); /* write slave address */
- writeb(0x0, &dev->sr); /* clear status register */
- writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */
-#endif
+ temp = set_i2c_bus_speed(i2c_dev[adap_no], gd->i2c1_clk, speed);
+ if (gd->flags & GD_FLG_RELOC) {
+ fsl_i2c_adap[adap_no].speed = temp;
+ fsl_i2c_adap[adap_no].slaveaddr = slaveadd;
+ }
+ writeb(slaveadd << 1, &i2c_dev[adap_no]->adr); /* write slave address */
+ writeb(0x0, &i2c_dev[adap_no]->sr); /* clear status register */
+ writeb(I2C_CR_MEN, &i2c_dev[adap_no]->cr); /* start I2C controller */
}
-static __inline__ int
-i2c_wait4bus(void)
+
+static __inline__ int i2c_wait4bus(int adap_no)
{
unsigned long long timeval = get_ticks();
- while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) {
+ while (readb(&i2c_dev[adap_no]->sr) & I2C_SR_MBB) {
if ((get_ticks() - timeval) > usec2ticks(I2C_TIMEOUT))
return -1;
}
@@ -213,18 +196,18 @@ i2c_wait4bus(void)
return 0;
}
-static __inline__ int
-i2c_wait(int write)
+
+static __inline__ int i2c_wait(int adap_no, int write)
{
u32 csr;
unsigned long long timeval = get_ticks();
do {
- csr = readb(&i2c_dev[i2c_bus_num]->sr);
+ csr = readb(&i2c_dev[adap_no]->sr);
if (!(csr & I2C_SR_MIF))
continue;
- writeb(0x0, &i2c_dev[i2c_bus_num]->sr);
+ writeb(0x0, &i2c_dev[adap_no]->sr);
if (csr & I2C_SR_MAL) {
debug("i2c_wait: MAL\n");
@@ -248,85 +231,85 @@ i2c_wait(int write)
return -1;
}
-static __inline__ int
-i2c_write_addr (u8 dev, u8 dir, int rsta)
+
+static __inline__ int i2c_write_addr (int adap_no, u8 dev, u8 dir, int rsta)
{
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
| (rsta ? I2C_CR_RSTA : 0),
- &i2c_dev[i2c_bus_num]->cr);
+ &i2c_dev[adap_no]->cr);
- writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr);
+ writeb((dev << 1) | dir, &i2c_dev[adap_no]->dr);
- if (i2c_wait(I2C_WRITE_BIT) < 0)
+ if (i2c_wait(adap_no, I2C_WRITE_BIT) < 0)
return 0;
return 1;
}
-static __inline__ int
-__i2c_write(u8 *data, int length)
+
+static __inline__ int i2c_write_data(int adap_no, u8 *data, int length)
{
int i;
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
- &i2c_dev[i2c_bus_num]->cr);
+ &i2c_dev[adap_no]->cr);
for (i = 0; i < length; i++) {
- writeb(data[i], &i2c_dev[i2c_bus_num]->dr);
+ writeb(data[i], &i2c_dev[adap_no]->dr);
- if (i2c_wait(I2C_WRITE_BIT) < 0)
+ if (i2c_wait(adap_no, I2C_WRITE_BIT) < 0)
break;
}
return i;
}
-static __inline__ int
-__i2c_read(u8 *data, int length)
+
+static __inline__ int i2c_read_data(int adap_no, u8 *data, int length)
{
int i;
writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0),
- &i2c_dev[i2c_bus_num]->cr);
+ &i2c_dev[adap_no]->cr);
/* dummy read */
- readb(&i2c_dev[i2c_bus_num]->dr);
+ readb(&i2c_dev[adap_no]->dr);
for (i = 0; i < length; i++) {
- if (i2c_wait(I2C_READ_BIT) < 0)
+ if (i2c_wait(adap_no, I2C_READ_BIT) < 0)
break;
/* Generate ack on last next to last byte */
if (i == length - 2)
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
- &i2c_dev[i2c_bus_num]->cr);
+ &i2c_dev[adap_no]->cr);
/* Generate stop on last byte */
if (i == length - 1)
- writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr);
+ writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[adap_no]->cr);
- data[i] = readb(&i2c_dev[i2c_bus_num]->dr);
+ data[i] = readb(&i2c_dev[adap_no]->dr);
}
return i;
}
-int
-i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
+
+static int __i2c_read(int adap_no, u8 dev, uint addr, int alen, u8 *data, int length)
{
int i = -1; /* signal error */
u8 *a = (u8*)&addr;
- if (i2c_wait4bus() >= 0
- && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
- && __i2c_write(&a[4 - alen], alen) == alen)
+ if (i2c_wait4bus(adap_no) >= 0
+ && i2c_write_addr(adap_no, dev, I2C_WRITE_BIT, 0) != 0
+ && i2c_write_data(adap_no, &a[4 - alen], alen) == alen)
i = 0; /* No error so far */
if (length
- && i2c_write_addr(dev, I2C_READ_BIT, 1) != 0)
- i = __i2c_read(data, length);
+ && i2c_write_addr(adap_no, dev, I2C_READ_BIT, 1) != 0)
+ i = i2c_read_data(adap_no, data, length);
- writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+ writeb(I2C_CR_MEN, &i2c_dev[adap_no]->cr);
if (i == length)
return 0;
@@ -334,19 +317,19 @@ i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
return -1;
}
-int
-i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
+
+static int __i2c_write(int adap_no, u8 dev, uint addr, int alen, u8 *data, int length)
{
int i = -1; /* signal error */
u8 *a = (u8*)&addr;
- if (i2c_wait4bus() >= 0
- && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
- && __i2c_write(&a[4 - alen], alen) == alen) {
- i = __i2c_write(data, length);
+ if (i2c_wait4bus(adap_no) >= 0
+ && i2c_write_addr(adap_no, dev, I2C_WRITE_BIT, 0) != 0
+ && i2c_write_data(adap_no, &a[4 - alen], alen) == alen) {
+ i = i2c_write_data(adap_no, data, length);
}
- writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+ writeb(I2C_CR_MEN, &i2c_dev[adap_no]->cr);
if (i == length)
return 0;
@@ -354,54 +337,125 @@ i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
return -1;
}
-int
-i2c_probe(uchar chip)
+
+static int __i2c_probe(int adap_no, uchar chip)
{
/* For unknow reason the controller will ACK when
* probing for a slave with the same address, so skip
* it.
*/
- if (chip == (readb(&i2c_dev[i2c_bus_num]->adr) >> 1))
+ if (chip == (readb(&i2c_dev[adap_no]->adr) >> 1))
return -1;
- return i2c_read(chip, 0, 0, NULL, 0);
+ return __i2c_read(adap_no, chip, 0, 0, NULL, 0);
}
-int i2c_set_bus_num(unsigned int bus)
+
+static int __i2c_set_bus_speed(int adap_no, unsigned int speed)
{
-#ifdef CONFIG_SYS_I2C2_OFFSET
- if (bus > 1) {
-#else
- if (bus > 0) {
-#endif
- return -1;
- }
+ unsigned int i2c_clk = (adap_no == 1) ? gd->i2c2_clk : gd->i2c1_clk;
- i2c_bus_num = bus;
+ writeb(0, &i2c_dev[adap_no]->cr); /* stop controller */
+ fsl_i2c_adap[adap_no].speed =
+ set_i2c_bus_speed(i2c_dev[adap_no], i2c_clk, speed);
+ writeb(I2C_CR_MEN, &i2c_dev[adap_no]->cr); /* start controller */
return 0;
}
-int i2c_set_bus_speed(unsigned int speed)
+
+/* Wrappers for the first controller */
+static void fsl_i2c1_init(int speed, int slaveadd)
+{
+ __i2c_init(0, speed, slaveadd);
+}
+
+static int fsl_i2c1_read(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+ return(__i2c_read(0, dev, addr, alen, data, length));
+}
+
+static int fsl_i2c1_write(u8 dev, uint addr, int alen, u8 *data, int length)
{
- unsigned int i2c_clk = (i2c_bus_num == 1) ? gd->i2c2_clk : gd->i2c1_clk;
+ return(__i2c_write(0, dev, addr, alen, data, length));
+}
- writeb(0, &i2c_dev[i2c_bus_num]->cr); /* stop controller */
- i2c_bus_speed[i2c_bus_num] =
- set_i2c_bus_speed(i2c_dev[i2c_bus_num], i2c_clk, speed);
- writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); /* start controller */
+static int fsl_i2c1_probe(uchar chip)
+{
+ return(__i2c_probe(0, chip));
+}
- return 0;
+static unsigned int fsl_i2c1_set_bus_speed(unsigned int speed)
+{
+ return(__i2c_set_bus_speed(0, speed));
+}
+
+static unsigned int fsl_i2c1_get_bus_speed(void)
+{
+ return(fsl_i2c_adap[0].speed);
+}
+
+
+/* Second controller */
+#ifdef CONFIG_SYS_FSL_I2C2_OFFSET
+static void fsl_i2c2_init(int speed, int slaveadd)
+{
+ __i2c_init(1, speed, slaveadd);
+}
+
+static int fsl_i2c2_read(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+ return(__i2c_read(1, dev, addr, alen, data, length));
}
-unsigned int i2c_get_bus_num(void)
+static int fsl_i2c2_write(u8 dev, uint addr, int alen, u8 *data, int length)
{
- return i2c_bus_num;
+ return(__i2c_write(1, dev, addr, alen, data, length));
}
-unsigned int i2c_get_bus_speed(void)
+static int fsl_i2c2_probe(uchar chip)
{
- return i2c_bus_speed[i2c_bus_num];
+ return(__i2c_probe(1, chip));
}
-#endif /* CONFIG_HARD_I2C */
+static unsigned int fsl_i2c2_set_bus_speed(unsigned int speed)
+{
+ return(__i2c_set_bus_speed(1, speed));
+}
+
+static unsigned int fsl_i2c2_get_bus_speed(void)
+{
+ return(fsl_i2c_adap[1].speed);
+}
+#endif
+
+i2c_adap_t fsl_i2c_adap[2] = {
+ {
+ .init = fsl_i2c1_init,
+ .probe = fsl_i2c1_probe,
+ .read = fsl_i2c1_read,
+ .write = fsl_i2c1_write,
+ .set_bus_speed = fsl_i2c1_set_bus_speed,
+ .get_bus_speed = fsl_i2c1_get_bus_speed,
+ .speed = CONFIG_SYS_FSL_I2C_SPEED,
+ .slaveaddr = CONFIG_SYS_FSL_I2C_SLAVE,
+ .init_done = 0,
+ .name = FSL_NAME(CONFIG_SYS_FSL_I2C_OFFSET)
+ },
+#ifdef CONFIG_SYS_FSL_I2C2_OFFSET
+ {
+ .init = fsl_i2c2_init,
+ .probe = fsl_i2c2_probe,
+ .read = fsl_i2c2_read,
+ .write = fsl_i2c2_write,
+ .set_bus_speed = fsl_i2c2_set_bus_speed,
+ .get_bus_speed = fsl_i2c2_get_bus_speed,
+ .speed = CONFIG_SYS_FSL_I2C2_SPEED,
+ .slaveaddr = CONFIG_SYS_FSL_I2C2_SLAVE,
+ .init_done = 0,
+ .name = FSL_NAME(CONFIG_SYS_FSL_I2C2_OFFSET)
+ }
+#endif
+};
+
+#endif /* CONFIG_FSL_I2C */
More information about the U-Boot
mailing list