[U-Boot] U-Boot compile error

[Afzal Nadirshah]

Hi Feng,
     This is the link from which the Resource CD for the 460EX canyonlands evaluation kit, was downloaded :
     http://www.amcc.com/Embedded/Downloads/download.html?cat=1&family=19&ins=33
     The u-boot source code was obtained from this CD.
Regards,
Afzal Nadirshah
________________________________________
From: Feng Kan [fkan at amcc.com]
Sent: Friday, February 06, 2009 10:46 PM
To: Afzal Nadirshah; u-boot at lists.denx.de
Subject: RE: [U-Boot] U-Boot compile error

Hi Afzal:
   Would you please send me the link to the files you got. I can help
you check it out.

Feng Kan
AMCC Software Engineering

-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
On Behalf Of Afzal Nadirshah
Sent: Thursday, February 05, 2009 9:13 PM
To: u-boot at lists.denx.de
Subject: [U-Boot] U-Boot compile error

Hi,
        I had downloaded U-Boot source code from AMCC website to build a
u-boot image for NAND Flash.

        Inside the u-boot directory I executed the following commands:
        make distclean
        make canyonlands_nand_config
        But I get the following error :
        : invalid option
         make: *** [canyonlands_nand_config] Error 1

        These same commands executed inside the u-boot downloaded from
the DENX site, does not give any errors.
        Has anybody else such a problem?

Regards,
Afzal Nadirshah




________________________________
http://www.mindtree.com/email/disclaimer.html

http://www.mindtree.com/email/disclaimer.html