[U-Boot] [PATCH v3] Nand driver for Nomadik SoC

[Stefan Roese]

On Sunday 08 February 2009, Alessandro Rubini wrote:
> From: Alessandro Rubini <rubini at unipv.it>
>
> This driver implements the ECC algorithm described in
> the CPU data sheet and uses the OOB layout chosen in
> already-released development systems (shipped with a custom-made
> u-boot 1.3.1).
>
> Signed-off-by: Alessandro Rubini <rubini at unipv.it>
> Acked-by: Andrea Gallo <andrea.gallo at stnwireless.com>
> ---
>
> Changes from V2: added nomadik.h, moved all register addresses there,
> fixed what J.C. suggested.
>
>  cpu/arm926ejs/nomadik/Makefile |    9 +-
>  cpu/arm926ejs/nomadik/nand.c   |    221++++++++++++++++++++++++++++++++++++++++

This driver should go into drivers/mtd/nand instead.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================