[U-Boot] [PATCH 03/27] Blackfin: bfin_mac: force boards to setup the MAC themselves

Mike Frysinger vapier at gentoo.org
Sat Feb 14 08:22:46 CET 2009


Since the on-chip MAC does not have an eeprom or similar interface, force
all Blackfin boards that use this driver to setup the board data with a
proper MAC.

Signed-off-by: Mike Frysinger <vapier at gentoo.org>
CC: Ben Warren <biggerbadderben at gmail.com>
---
 drivers/net/bfin_mac.c |   16 ++++++++--------
 drivers/net/bfin_mac.h |    2 +-
 lib_blackfin/board.c   |   48 ++----------------------------------------------
 3 files changed, 11 insertions(+), 55 deletions(-)

diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 23f934a..12d98c2 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -315,7 +315,7 @@ static int bfin_EMAC_init(struct eth_device *dev, bd_t *bd)
 		return -1;
 
 	/* Initialize EMAC address */
-	bfin_EMAC_setup_addr(bd);
+	bfin_EMAC_setup_addr(dev->enetaddr);
 
 	/* Initialize TX and RX buffer */
 	for (i = 0; i < PKTBUFSRX; i++) {
@@ -373,16 +373,16 @@ static void bfin_EMAC_halt(struct eth_device *dev)
 
 }
 
-void bfin_EMAC_setup_addr(bd_t *bd)
+void bfin_EMAC_setup_addr(uchar *enetaddr)
 {
 	*pEMAC_ADDRLO =
-		bd->bi_enetaddr[0] |
-		bd->bi_enetaddr[1] << 8 |
-		bd->bi_enetaddr[2] << 16 |
-		bd->bi_enetaddr[3] << 24;
+		enetaddr[0] |
+		enetaddr[1] << 8 |
+		enetaddr[2] << 16 |
+		enetaddr[3] << 24;
 	*pEMAC_ADDRHI =
-		bd->bi_enetaddr[4] |
-		bd->bi_enetaddr[5] << 8;
+		enetaddr[4] |
+		enetaddr[5] << 8;
 }
 
 ADI_ETHER_BUFFER *SetupRxBuffer(int no)
diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h
index 084f533..8f467a3 100644
--- a/drivers/net/bfin_mac.h
+++ b/drivers/net/bfin_mac.h
@@ -61,6 +61,6 @@ static void bfin_EMAC_halt(struct eth_device *dev);
 static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet, int length);
 static int bfin_EMAC_recv(struct eth_device *dev);
 
-static void bfin_EMAC_setup_addr(bd_t *bd);
+void bfin_EMAC_setup_addr(uchar *enetaddr);
 
 #endif
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index c223711..537f69a 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -106,10 +106,6 @@ static void display_global_data(void)
 	printf(" \\-bd: %x\n", gd->bd);
 	printf("   |-bi_baudrate: %x\n", bd->bi_baudrate);
 	printf("   |-bi_ip_addr: %x\n", bd->bi_ip_addr);
-	printf("   |-bi_enetaddr: %x %x %x %x %x %x\n",
-	       bd->bi_enetaddr[0], bd->bi_enetaddr[1],
-	       bd->bi_enetaddr[2], bd->bi_enetaddr[3],
-	       bd->bi_enetaddr[4], bd->bi_enetaddr[5]);
 	printf("   |-bi_boot_params: %x\n", bd->bi_boot_params);
 	printf("   |-bi_memstart: %x\n", bd->bi_memstart);
 	printf("   |-bi_memsize: %x\n", bd->bi_memsize);
@@ -338,35 +334,6 @@ void board_init_r(gd_t * id, ulong dest_addr)
 	/* relocate environment function pointers etc. */
 	env_relocate();
 
-#ifdef CONFIG_CMD_NET
-	/* board MAC address */
-	s = getenv("ethaddr");
-	if (s == NULL) {
-# ifndef CONFIG_ETHADDR
-#  if 0
-		if (!board_get_enetaddr(bd->bi_enetaddr)) {
-			char nid[20];
-			sprintf(nid, "%02X:%02X:%02X:%02X:%02X:%02X",
-				bd->bi_enetaddr[0], bd->bi_enetaddr[1],
-				bd->bi_enetaddr[2], bd->bi_enetaddr[3],
-				bd->bi_enetaddr[4], bd->bi_enetaddr[5]);
-			setenv("ethaddr", nid);
-		}
-#  endif
-# endif
-	} else {
-		int i;
-		char *e;
-		for (i = 0; i < 6; ++i) {
-			bd->bi_enetaddr[i] = simple_strtoul(s, &e, 16);
-			s = (*e) ? e + 1 : e;
-		}
-	}
-
-	/* IP Address */
-	bd->bi_ip_addr = getenv_IPaddr("ipaddr");
-#endif
-
 	/* Initialize devices */
 	devices_init();
 	jumptable_init();
@@ -393,21 +360,10 @@ void board_init_r(gd_t * id, ulong dest_addr)
 #endif
 
 #ifdef CONFIG_CMD_NET
+	/* IP Address */
+	bd->bi_ip_addr = getenv_IPaddr("ipaddr");
 	printf("Net:   ");
 	eth_initialize(gd->bd);
-	if ((s = getenv("ethaddr"))) {
-# ifndef CONFIG_NET_MULTI
-		size_t i;
-		char *e;
-		for (i = 0; i < 6; ++i) {
-			bd->bi_enetaddr[i] = simple_strtoul(s, &e, 16);
-			s = (*e) ? e + 1 : e;
-		}
-# endif
-		printf("MAC:   %02X:%02X:%02X:%02X:%02X:%02X\n",
-			bd->bi_enetaddr[0], bd->bi_enetaddr[1], bd->bi_enetaddr[2],
-			bd->bi_enetaddr[3], bd->bi_enetaddr[4], bd->bi_enetaddr[5]);
-	}
 #endif
 
 	display_global_data();
-- 
1.6.1.3



More information about the U-Boot mailing list