[U-Boot] tftp not working

[Afzal Nadirshah]

Hi,
I did as suggested by you. I also set the serverip as well as ipaddr. Now when i do a tftp 100000 u-boot-nand.bin,
i get the following :

=> tftp 100000 u-boot-nand.bin
Waiting for PHY auto negotiation to complete...... TIMEOUT !
 done
ENET Speed is 10 Mbps - HALF duplex connection (EMAC0)
Using ppc_4xx_eth0 device
TFTP from server 172.22.68.33; our IP address is 172.22.68.36
Filename 'u-boot-nand.bin'.
Load address: 0x100000
Loading: *

It hangs at this point

Regards,
Afzal Nadirshah
________________________________________
From: Stefan Roese [sr at denx.de]
Sent: Monday, February 16, 2009 2:12 PM
To: u-boot at lists.denx.de
Cc: Afzal Nadirshah; Wolfgang Denk
Subject: Re: [U-Boot] tftp not working

On Monday 16 February 2009, Afzal Nadirshah wrote:
>          I tried the same. But it still gives the same error.

Please send the complete bootlog and the output of "printenv".

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

http://www.mindtree.com/email/disclaimer.html