[U-Boot] Fwd: [PATCH v2 0/5] Add multi-chips support for NAND, FSL-UPM and TQM8548

[arun sharma]

>* Index: u-boot/drivers/mtd/nand/fsl_upm.c
*>* ===================================================================
*>* --- u-boot.orig/drivers/mtd/nand/fsl_upm.c
*>* +++ u-boot/drivers/mtd/nand/fsl_upm.c
*>* @@ -90,8 +90,11 @@ static void fun_cmd_ctrl(struct mtd_info
*>*  	mar = cmd << (32 - fun->width);
*>*  	io_addr = fun->upm.io_addr;
*>*  #if CONFIG_SYS_NAND_MAX_CHIPS > 1
*>* -	if (fun->chip_nr > 0)
*>* +	if (fun->chip_nr > 0) {
*>*  		io_addr += fun->chip_offset * fun->chip_nr;
*>* +		if (fun->upm_mar_chip_offset)
*>* +			mar |= fun->upm_mar_chip_offset * fun->chip_nr;
*>* +	}
*
above patch is not suitable for 832x becuase mar register has only 26
bit (6 bit are resrved)
what should be done



On Sat, Feb 14, 2009 at 2:28 AM, Scott Wood <scottwood at freescale.com> wrote:

> On Wed, Feb 11, 2009 at 06:38:19PM +0100, Wolfgang Grandegger wrote:
> > The following patch series intends to support the Micron multi-chip
> > NAND device MT29F8G08FAB on the TQM8548 modules from TQ-Components.
> > To offer this multi-chip device as one single device to the user,
> > multi-chip device has been added to the MTD NAND layer and the
> > FSL-UPM-NAND driver.
> >
> > The TQM8548 support is based on the following patch series sent
> > a few minutes ago:
> >
> > [PATCH 0/8] MPC85xx: Support for TQM8548-AG and TQM8548-BE
> >
> > Wolfgang.
>
> Applied 1-5 to u-boot-nand-flash/next, thanks!
>
> -Scott
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>