[U-Boot] [PATCH 08/12] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1

[Heiko Schocher]

Hello Kim,

Heiko Schocher wrote:
> Kim Phillips wrote:
>> On Wed, 11 Feb 2009 19:26:22 +0100
>> Heiko Schocher <hs at denx.de> wrote:
>>
>>> +	switch (svid) {
>>> +		case 0x0020:
>> 'case' should be aligned directly under 'switch'.
>>
>>> +++ b/cpu/mpc83xx/start.S
>>> @@ -137,6 +137,11 @@ get_pvr:
>>>  	mfspr	r3, PVR
>>>  	blr
>>>
>>> +	.globl get_svr
>>> +get_svr:
>>> +	mfspr	r3, SVR
>>> +	blr
>>> +
>> on a ./MAKEALL SIMPC8313_LP, I'm getting:
>>
>> powerpc-linux-gnu-ld: NAND bootstrap too big
>> powerpc-linux-gnu-ld: NAND bootstrap too big
>> make[1]: *** [/home/r1aaha/git/u-boot/nand_spl/u-boot-spl] Error 1
>> make: *** [nand_spl] Error 2
>> make: *** Waiting for unfinished jobs....
>> powerpc-linux-gnu-size: './u-boot': No such file
> 
> Hmm.. with actual u-boot I get for this board (without my patches):
> 
> [hs at pollux u-boot]$ ./MAKEALL SIMPC8313_LP
> ...Large Page NAND...Configuring for SIMPC8313 board...
> In file included from /home/hs/U-Boot-Patches/u-boot/include/config.h:5,
>                  from include/common.h:35:
> /home/hs/U-Boot-Patches/u-boot/include/configs/SIMPC8313.h:81:1: warning: "CONFIG_MAX_MEM_MAPPED" redefined
> In file included from /home/hs/U-Boot-Patches/u-boot/include/config.h:4,
>                  from include/common.h:35:
> /home/hs/U-Boot-Patches/u-boot/include/asm/config.h:28:1: warning: this is the location of the previous definition
> In file included from /home/hs/U-Boot-Patches/u-boot/include/config.h:5,
>                  from start.S:30:
> [...]

I was to fast, i get the error (I just have to wait for the end of
the above warnings):

[hs at pollux u-boot]$ ./MAKEALL SIMPC8313_LP
...Large Page NAND...Configuring for SIMPC8313 board...
In file included from /home/hs/U-Boot-Patches/u-boot/include/config.h:5,
                 from include/common.h:35:
[..]
/home/hs/U-Boot-Patches/u-boot/include/asm/config.h:28:1: warning: this is the location of the previous definition
ppc_82xx-ld: NAND bootstrap too big
ppc_82xx-ld: NAND bootstrap too big
make[1]: *** [/home/hs/U-Boot-Patches/u-boot/nand_spl/u-boot-spl] Fehler 1
make: *** [nand_spl] Fehler 2
make: *** Warte auf noch nicht beendete Prozesse...
ppc_82xx-size: './u-boot': No such file
[hs at pollux u-boot]$

I get this error just with actual u-boot.

bye
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany