[U-Boot] [PATCH] ppc4xx: Some more PMC405 coding-style cleanup

[Matthias Fuchs]

Thanks.

Acked-by: Matthias Fuchs <matthias.fuchs at esd.eu>

On Wednesday 18 February 2009 14:09, Stefan Roese wrote:
> Signed-off-by: Stefan Roese <sr at denx.de>
> ---
>  board/esd/pmc405/pmc405.c |   30 +++++++++++++++---------------
>  1 files changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c
> index 10e7ce4..94caa6c 100644
> --- a/board/esd/pmc405/pmc405.c
> +++ b/board/esd/pmc405/pmc405.c
> @@ -72,22 +72,22 @@ int board_early_init_f (void)
>  	/*
>  	 * Setup GPIO pins
>  	 */
> -	mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_FPGA_INIT | \
> -					CONFIG_SYS_FPGA_DONE | \
> -					CONFIG_SYS_XEREADY | \
> -					CONFIG_SYS_NONMONARCH | \
> +	mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_FPGA_INIT |
> +					CONFIG_SYS_FPGA_DONE |
> +					CONFIG_SYS_XEREADY |
> +					CONFIG_SYS_NONMONARCH |
>  					CONFIG_SYS_REV1_2) << 5));
>  
> -	if (!(in_be32((void*)GPIO0_IR) & CONFIG_SYS_REV1_2)) {
> +	if (!(in_be32((void *)GPIO0_IR) & CONFIG_SYS_REV1_2)) {
>  		/* rev 1.2 boards */
> -		mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_INTA_FAKE | \
> +		mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_INTA_FAKE |
>  						CONFIG_SYS_SELF_RST) << 5));
>  	}
>  
> -	out_be32((void*)GPIO0_OR, CONFIG_SYS_VPEN);
> +	out_be32((void *)GPIO0_OR, CONFIG_SYS_VPEN);
>  	/* setup for output */
> -	out_be32((void*)GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK | \
> -	      CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY | CONFIG_SYS_VPEN);
> +	out_be32((void *)GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK |
> +		 CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY | CONFIG_SYS_VPEN);
>  
>  	/*
>  	 * - check if rev1_2 is low, then:
> @@ -104,15 +104,16 @@ int misc_init_r (void)
>  	gd->bd->bi_flashoffset = 0;
>  
>  	/* deassert EREADY# */
> -	out_be32((void*)GPIO0_OR,
> -		 in_be32((void*)GPIO0_OR) | CONFIG_SYS_XEREADY);
> +	out_be32((void *)GPIO0_OR,
> +		 in_be32((void *)GPIO0_OR) | CONFIG_SYS_XEREADY);
>  	return (0);
>  }
>  
>  ushort pmc405_pci_subsys_deviceid(void)
>  {
>  	ulong val;
> -	val = in_be32((void*)GPIO0_IR);
> +
> +	val = in_be32((void *)GPIO0_IR);
>  	if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */
>  		/* check monarch# signal */
>  		if (val & CONFIG_SYS_NONMONARCH)
> @@ -128,9 +129,8 @@ ushort pmc405_pci_subsys_deviceid(void)
>  int checkboard (void)
>  {
>  	ulong val;
> -
>  	char str[64];
> -	int i = getenv_r ("serial#", str, sizeof(str));
> +	int i = getenv_r("serial#", str, sizeof(str));
>  
>  	puts ("Board: ");
>  
> @@ -139,7 +139,7 @@ int checkboard (void)
>  	else
>  		puts(str);
>  
> -	val = in_be32((void*)GPIO0_IR);
> +	val = in_be32((void *)GPIO0_IR);
>  	if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */
>  		puts(" rev1.2 (");
>  		if (val & CONFIG_SYS_NONMONARCH) /* monarch# signal */

-- 
-------------------------------------------------------------------------
Dipl.-Ing. Matthias Fuchs
Head of System Design

esd electronic system design gmbh
Vahrenwalder Str. 207 - 30165 Hannover - GERMANY
Phone: +49-511-37298-0 - Fax: +49-511-37298-68
Please visit our homepage http://www.esd.eu
Quality Products - Made in Germany
-------------------------------------------------------------------------
Geschäftsführer: Klaus Detering, Dr. Werner Schulze
Amtsgericht Hannover HRB 51373 - VAT-ID DE 115672832
-------------------------------------------------------------------------