[U-Boot] u-boot NAND fail on M5329EVB

[kescuin]

Hi everyone,

Some time ago I ask you about NAND problems on u-boot over my M5329
freescale EVB. We solve it using the last u-boot (U-Boot 2008.10) compiling
it with an M5329BFEE_config.

I though everything was going well, but some problems have appeared now.
When I try to write on NAND device blocks of 512 bytes (the nand is and
16KiB pages of 512 bytes) everything seems OK, any error message.

But when I try to read the block, an error (-74) occurs in any block except
the first one I've written on. If I take a look on the information written
on every page I can see that ONLY the first page I wrote is written
correctly. The other pages have wrong information inside them.

It doesn't matter if I write every page separately or in bigger blocks.
U-boot only write correctly the first page that I attempt to write. Until I
erase the whole memory.

Did you know anything about it? Could be my Flash memory chip be broken? I
don't thing so, 'cause I can manage it correctly from ucLinux.

Thanks in advance.