[U-Boot] [PATCH 6/7] mpc83xx: PCI: Fix hard-coded first_busno value

[Anton Vorontsov]

We should use pci_last_busno() in pci_init_bus(), otherwise we'll
erroneously re-use PCI0's first_busno for PCI1 hoses.

NOTE: The patch is untested. All MPC83xx FSL boards I have have
PCI1 in miniPCI form, for which I don't have any cards handy.

But looking in cpu/mpc85xx/pci.c:
...
#ifdef CONFIG_MPC85XX_PCI2
        hose = &pci_hose[1];

        hose->first_busno = pci_hose[0].last_busno + 1;

And considering that we do the same for MPC83xx PCI-E support,
I think this patch is correct.

Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
 cpu/mpc83xx/pci.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
index 8f5017c..a42b230 100644
--- a/cpu/mpc83xx/pci.c
+++ b/cpu/mpc83xx/pci.c
@@ -91,7 +91,7 @@ static void pci_init_bus(int bus, struct pci_region *reg)
 	hose->regions[i].size = gd->ram_size;
 	hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
 
-	hose->first_busno = 0;
+	hose->first_busno = pci_last_busno() + 1;
 	hose->last_busno = 0xff;
 
 	pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80,
-- 
1.5.6.5