[U-Boot] [PATCH 1/6] fdt_support, usb: Move fdt_fixup_dr_usb() routine to drivers/usb/

Jerry Van Baren vanbaren at cideas.com
Fri Feb 20 12:24:44 CET 2009


Anton Vorontsov wrote:
> In subsequent patches we'll use FSL-specific functions in
> fdt_fixup_dr_usb(), so let's move the routine to a more appropriate
> place.
> 
> So far fsl_dr_usb.c isn't actually an USB driver, but eventually it
> will turn into one, let's hope. ;-)
> 
> Also rename CONFIG_HAS_FSL_DR_USB to CONFIG_USB_FSL_DR to be
> consistent with other USB drivers.
> 
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> ---
>  board/freescale/mpc8315erdb/mpc8315erdb.c |    1 +
>  board/freescale/mpc837xemds/mpc837xemds.c |    1 +
>  board/freescale/mpc837xerdb/mpc837xerdb.c |    1 +
>  common/fdt_support.c                      |   41 ----------------------
>  drivers/usb/Makefile                      |    1 +
>  drivers/usb/fsl_dr_usb.c                  |   52 +++++++++++++++++++++++++++++
>  include/configs/MPC8315ERDB.h             |    2 +-
>  include/configs/MPC837XEMDS.h             |    2 +-
>  include/configs/MPC837XERDB.h             |    2 +-
>  include/fdt_support.h                     |    6 ---
>  include/fsl_dr_usb.h                      |   21 +++++++++++
>  11 files changed, 80 insertions(+), 50 deletions(-)
>  create mode 100644 drivers/usb/fsl_dr_usb.c
>  create mode 100644 include/fsl_dr_usb.h

Hi Anton,

I presume you CC:ed me on this series because fdt_support.c is involved. 
  I view this as more of a board/processor issue than a libfdt issue: 
I'm happy to ack the concept, but leave it to Kim/Andy/Kumar to do the 
dirty work.

Thanks,
gvb



More information about the U-Boot mailing list