[U-Boot] Status open patches: ARM, AT91, IXP, PXA
Wolfgang Denk
wd at denx.de
Sun Feb 22 01:00:03 CET 2009
Dear Jean-Christophe,
I have the following patches still marked as open in my list. Could
you please have a look...
ARM, AT91:
04/24 michael [U-Boot-Users] [PATCH ARM 0/2] Ide support
04/24 michael [U-Boot-Users] [PATCH ARM 1/2] Ide support io function
04/24 michael [U-Boot-Users] [PATCH ARM 2/2] Ide support. Ide registration
08/15 Sergey Lapin [U-Boot] [PATCH][Re-submit] Hardware watchdog support for AT91SAM9260 CPU
08/28 Markus Kammerstet [U-Boot] PATCH: U-Boot support for Olimex SAM9L-9260 development board
10/07 "Alan Carvalho de [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM
10/07 "Alan Carvalho de [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash
10/13 "Roman Mashak" [U-Boot] [PATCH] ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
10/21 Tomohiro Masubuch [U-Boot] [PATCH v4] Add support for KMC KZM-ARM11-01 board
10/23 Magnus Lilja [U-Boot] [PATCH 1/2] i.MX31: Use do_div for some calculations.
10/23 Magnus Lilja [U-Boot] [PATCH 2/2] i.MX31: Add basic support for Freescale's i.MX31 PDK board.
11/07 Ilko Iliev [U-Boot] [PATCH] at91: add support for PM9261 board
11/13 Chaofu Chen [U-Boot] [PATCH] bug fix for the delay function of ARM s3c44b0
11/21 Hugo Villeneuve [U-Boot] [PATCH 1/1] ARM DaVinci: Add common peripherals and modules enable functions.
11/26 Jens Scharsig [U-Boot] [PATCH] AT91RM9200 BGA port D defines
12/04 Stefan Althoefer [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1
12/11 Rohit Hagargundgi [U-Boot] [PATCH v2 2/4] Environment support for Flex-OneNAND
12/11 Rohit Hagargundgi [U-Boot] [PATCH v2 3/4] JFFS2 commands support for Flex-OneNAND
12/11 Rohit Hagargundgi [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command
12/11 Rohit Hagargundgi [U-Boot] [PATCH 0/3] Bad blocks and Partition support for OneNAND / Flex-OneNAND
12/11 Rohit Hagargundgi [U-Boot] [PATCH 1/3] Bad block support for environment variables partition in OneNAND
12/11 Rohit Hagargundgi [U-Boot] [PATCH 2/3] Add partition based OneNAND commands
12/11 Rohit Hagargundgi [U-Boot] [PATCH 3/3] Create bad block aware partition table
12/13 Jean-Christophe P [U-Boot] [PATCH] integratorap: fix PCI support
12/14 Dirk Behme [U-Boot] [PATCH 01/15 v6] OMAP3: Add pin mux, clock and cpu headers
12/14 Dirk Behme [U-Boot] [PATCH 05/15 v6] OMAP3: Add common board, interrupt and system info
12/17 Peter Tyser [U-Boot] [PATCH v6 0/3] Support for XPedite5370 and misc GPIO
01/07 Ulf Samuelsson [U-Boot] [PATCH 1/1] ARM: Add command to control coloured led from the console
01/20 Ben Warren Re: [U-Boot] [PATCH] Add support W90P710 ARM SoC from Nuvoton
01/22 Jean-Christophe P [U-Boot] [PATCH] at91rm9200: move serial driver to drivers/serial
01/22 Jean-Christophe P [U-Boot] [PATCH 0/2] at91sam9: add watchdog support
01/22 Jean-Christophe P [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config
01/22 Jean-Christophe P [U-Boot] [PATCH 1/2] at91sam9: add watchdog support
01/24 Michael Roth [U-Boot] Patches for new at91 board / lowlevel_init.S
01/25 Michael Roth Re: [U-Boot] Patches for new at91 board / lowlevel_init.S
01/25 Jason Kridner [U-Boot] [PATCH v2 0/5] OMAP3: Add OMAP3 board support
01/25 Jason Kridner [U-Boot] [PATCH v2 1/5] OMAP3: Add common power code, README, and BeagleBoard
01/25 Jason Kridner [U-Boot] [PATCH v2 2/5] OMAP3: Add Overo board
01/25 Jason Kridner [U-Boot] [PATCH v2 3/5] OMAP3: Add EVM board
01/25 Jason Kridner [U-Boot] [PATCH v2 4/5] OMAP3: Add Pandora support
01/25 Jason Kridner [U-Boot] [PATCH v2 5/5] OMAP3: Add Zoom1 board support
01/26 Magnus Lilja Re: [U-Boot] [PATCH v3 0/6] i.MX31: Add NAND support and new PDK board.
01/27 Dirk Behme [U-Boot] [PATCH v3 1/5] OMAP3: Add common power code, README, and BeagleBoard
02/01 Jean-Christophe P [U-Boot] [PATCH] at91sam9xeek: fix soc name
02/01 Jean-Christophe P [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config
02/01 Jean-Christophe P [U-Boot] [PATCH 1/2] at91sam9: add watchdog support
02/02 Dirk Behme [U-Boot] [PATCH 3/7] OMAP3: Add OMAP3 auto detection
02/02 Dirk Behme [U-Boot] [PATCH 6/7] OMAP3: Add OMAP3 core changes for MUSB
02/02 Dirk Behme [U-Boot] [PATCH 7/7] OMAP3: Clean up MMC code
02/03 Jean-Christophe P [U-Boot] [PATCH] integratorap: fix PCI support
02/05 Grazvydas Ignotas Re: [U-Boot] [PATCH 4/7] OMAP3: Pandora: Update pin mux
02/06 Michael Roth [U-Boot] [PATCH] at91: CONFIG_USART3 renamed to CONFIG_USART_DBGU
02/06 Michael Roth [U-Boot] [PATCH] at91: Factored out common serial hardware initialization
02/06 Jean-Christophe P Re: [U-Boot] [PATCH] at91: Factored out common serial hardware initialization
02/06 Mark Jackson Re: [U-Boot] [PATCH 1/1] Setup extra MIMC200 chip selects
02/06 Jean-Christophe P Re: [U-Boot] [PATCH] Add support W90P710 ARM SoC from Nuvoton
02/07 Anatolij Gustschi [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit
02/07 Jean-Christophe P Re: [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit
02/07 Anatolij Gustschi Re: [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit
02/07 Anatolij Gustschi [U-Boot] [PATCH 2/9 v4] i.MX31: add a simple gpio driver
02/09 Alessandro Rubini [U-Boot] [PATCH 1/3] Added nomadik.h header
02/10 Fabio Porcedda [U-Boot] Atmel AT91 USB Device Controller Driver
02/10 Remy Bohmer Re: [U-Boot] Atmel AT91 USB Device Controller Driver
02/11 Remy Bohmer Re: [U-Boot] Atmel AT91 USB Device Controller Driver
02/12 Dirk Behme [U-Boot] [PATCH 0/7 v2] OMAP3: Add some additional improvements and fixes
02/12 Dirk Behme Re: [U-Boot] [PATCH 6/7] OMAP3: Add OMAP3 core changes for MUSB
02/12 Dirk Behme [U-Boot] [PATCH 4/7 v2] OMAP3: Pandora: Update pin mux
02/12 Dirk Behme [U-Boot] [PATCH 3/7 v2] OMAP3: Add OMAP3 auto detection
02/12 Dirk Behme [U-Boot] [PATCH 7/7 v2] OMAP3: Clean up MMC code
02/12 Dirk Behme [U-Boot] [PATCH 1/7 v2] OMAP3: Overo: Clean up pin mux and GPIO configuration
02/12 Dirk Behme [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB
02/12 Dirk Behme [U-Boot] [PATCH 2/7 v2] OMAP3: Beagle: Add board revision detection
02/12 Dirk Behme Re: [U-Boot] [PATCH 5/7] OMAP3: Add serial number based on die ID
02/12 Dirk Behme [U-Boot] [PATCH 5/7 v2] OMAP3: Add serial number based on die ID
02/13 Grzegorz Bernacki [U-Boot] [PATCH v6] Add support for the digsy MTC board.
02/13 Mark Jackson [U-Boot] [PATCH 1/1 v2] Setup extra MIMC200 chip selects
02/16 Fabio Porcedda Re: [U-Boot] Atmel AT91 USB Device Controller Driver
02/17 Hugo Villeneuve Re: [U-Boot] [PATCH 1/1] ARM DaVinci: Add common peripherals andmodules enable functions.
02/19 ksi at koi8.net [U-Boot] [PATCH] Davinci I2C code cleanup
02/19 Tom Re: [U-Boot] [PATCH] ARM:OMAP3 Change mmc_init to mmc_legacy_init
02/20 yanfeng qin [U-Boot] [PATH] ARM:OMAP3 Add OTG host support
02/20 yanfeng qin [U-Boot] [PATCH] ARM:OMAP3 Add OTG host support
02/20 Dirk Behme [U-Boot] [PATCH 7/7 v3] OMAP3: Clean up MMC code
PXA:
12/03 Daniel Mack Re: [U-Boot] [PATCH] PXA3xx: fix CKEN[AB]
IXP:
12/04 Stefan Althoefer [U-Boot] [PATCH] IXP425: Add new IXP425 board emPC-A400 Part 2/2
12/04 Stefan Althoefer [U-Boot] [PATCH] IXP425: Add new IXP425 board emPC-A400 Part 1/2
12/20 Stefan Althoefer [U-Boot] [Bug] IXP425 and e1000 network driver
Thanks in advance.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The light at the end of the tunnel is usually a "No Exit" sign.
More information about the U-Boot
mailing list