[U-Boot] [PATCH] r8a66597-hcd: fix cannot use external hub

Remy Bohmer linux at bohmer.net
Sun Feb 22 10:55:30 CET 2009


Hello,

2008/10/29 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>:
> Fix the problem that cannot use external hub, because this driver
> did not control correctly a DEVADDx register.
>
> Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
> ---
>  drivers/usb/r8a66597-hcd.c |   36 +++++++++++++++++++++++++++++++-----
>  1 files changed, 31 insertions(+), 5 deletions(-)

Applied to u-boot-usb
Thanks.

Remy

>
> diff --git a/drivers/usb/r8a66597-hcd.c b/drivers/usb/r8a66597-hcd.c
> index 0d3931e..5007051 100644
> --- a/drivers/usb/r8a66597-hcd.c
> +++ b/drivers/usb/r8a66597-hcd.c
> @@ -36,12 +36,37 @@ static unsigned short vif = CONFIG_R8A66597_LDRV;
>  static unsigned short endian = CONFIG_R8A66597_ENDIAN;
>  static struct r8a66597 gr8a66597;
>
> -static void set_devadd_reg(struct r8a66597 *r8a66597, u8 r8a66597_address,
> -                          u16 usbspd, u8 upphub, u8 hubport, int port)
> +static void get_hub_data(struct usb_device *dev, u16 *hub_devnum, u16 *hubport)
>  {
> -       u16 val;
> +       int i;
> +
> +       *hub_devnum = 0;
> +       *hubport = 0;
> +
> +       /* check a device connected to root_hub */
> +       if ((dev->parent && dev->parent->devnum == 1) ||
> +           (dev->devnum == 1))
> +               return;
> +
> +       for (i = 0; i < USB_MAXCHILDREN; i++) {
> +               if (dev->parent->children[i] == dev) {
> +                       *hub_devnum = (u8)dev->parent->devnum;
> +                       *hubport = i;
> +                       return;
> +               }
> +       }
> +
> +       printf("get_hub_data error.\n");
> +}
> +
> +static void set_devadd(struct r8a66597 *r8a66597, u8 r8a66597_address,
> +                       struct usb_device *dev, int port)
> +{
> +       u16 val, usbspd, upphub, hubport;
>        unsigned long devadd_reg = get_devadd_addr(r8a66597_address);
>
> +       get_hub_data(dev, &upphub, &hubport);
> +       usbspd = r8a66597->speed;
>        val = (upphub << 11) | (hubport << 8) | (usbspd << 6) | (port & 0x0001);
>        r8a66597_write(r8a66597, val, devadd_reg);
>  }
> @@ -818,7 +843,7 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
>        R8A66597_DPRINT("pipe = %08x, buffer = %p, len = %d, devnum = %d\n",
>                        pipe, buffer, transfer_len, dev->devnum);
>
> -       set_devadd_reg(r8a66597, dev->devnum, r8a66597->speed, 0, 0, 0);
> +       set_devadd(r8a66597, dev->devnum, dev, 0);
>
>        pipe_buffer_setting(r8a66597, dev, pipe);
>
> @@ -854,13 +879,14 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe,
>                                                setup);
>
>        R8A66597_DPRINT("%s: setup\n", __func__);
> -       set_devadd_reg(r8a66597, r8a66597_address, r8a66597->speed, 0, 0, 0);
> +       set_devadd(r8a66597, r8a66597_address, dev, 0);
>
>        if (send_setup_packet(r8a66597, dev, setup) < 0) {
>                printf("setup packet send error\n");
>                return -1;
>        }
>
> +       dev->act_len = 0;
>        if (usb_pipein(pipe))
>                if (receive_control_packet(r8a66597, dev, buffer,
>                                                transfer_len) < 0)
> --
> 1.5.5
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>


More information about the U-Boot mailing list