[U-Boot] Status open patches: ARM, AT91, IXP, PXA

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Sun Feb 22 16:22:38 CET 2009


08/28 Markus Kammerstet  [U-Boot] PATCH: U-Boot support for Olimex SAM9L-9260 development board                                                      
10/07 "Alan Carvalho de  [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM                                                      
10/07 "Alan Carvalho de  [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash                                             
10/21 Tomohiro Masubuch  [U-Boot] [PATCH v4] Add support for KMC KZM-ARM11-01 board                                                                  
10/23 Magnus Lilja       [U-Boot] [PATCH 1/2] i.MX31: Use do_div for some calculations.                                                              
10/23 Magnus Lilja       [U-Boot] [PATCH 2/2] i.MX31: Add basic support for Freescale's i.MX31 PDK board.                                            
11/07 Ilko Iliev         [U-Boot] [PATCH] at91: add support for PM9261 board                                                                         
11/13 Chaofu Chen        [U-Boot] [PATCH] bug fix for the delay function of ARM s3c44b0                                                              
12/04 Stefan Althoefer   [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1                                                              
12/13 Jean-Christophe P  [U-Boot] [PATCH] integratorap: fix PCI support                                                                              
12/17 Peter Tyser        [U-Boot] [PATCH v6 0/3] Support for XPedite5370 and misc GPIO                                                               
01/26 Magnus Lilja       Re: [U-Boot] [PATCH v3 0/6] i.MX31: Add NAND support and new PDK board.                                                     
02/03 Jean-Christophe P  [U-Boot] [PATCH] integratorap: fix PCI support                                                                              
02/06 Michael Roth       [U-Boot] [PATCH] at91: CONFIG_USART3 renamed to CONFIG_USART_DBGU                                                           
02/06 Michael Roth       [U-Boot] [PATCH] at91: Factored out common serial hardware initialization                                                   
02/06 Jean-Christophe P  Re: [U-Boot] [PATCH] at91: Factored out common serial hardware initialization                                               
02/07 Anatolij Gustschi  [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit                                                      
02/07 Jean-Christophe P  Re: [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit                                                  
02/07 Anatolij Gustschi  Re: [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit                                                  
02/07 Anatolij Gustschi  [U-Boot] [PATCH 2/9 v4] i.MX31: add a simple gpio driver                                                                    
02/10 Fabio Porcedda     [U-Boot] Atmel AT91 USB Device Controller Driver                                                                            
02/10 Remy Bohmer        Re: [U-Boot] Atmel AT91 USB Device Controller Driver                                                                        
02/11 Remy Bohmer        Re: [U-Boot] Atmel AT91 USB Device Controller Driver                                                                        
02/12 Dirk Behme         [U-Boot] [PATCH 0/7 v2] OMAP3: Add some additional improvements and fixes                                                   
02/12 Dirk Behme         Re: [U-Boot] [PATCH 6/7] OMAP3: Add OMAP3 core changes for MUSB                                                             
02/12 Dirk Behme         [U-Boot] [PATCH 4/7 v2] OMAP3: Pandora: Update pin mux                                                                      
02/12 Dirk Behme         [U-Boot] [PATCH 3/7 v2] OMAP3: Add OMAP3 auto detection                                                                     
02/12 Dirk Behme         [U-Boot] [PATCH 7/7 v2] OMAP3: Clean up MMC code                                                                            
02/12 Dirk Behme         [U-Boot] [PATCH 1/7 v2] OMAP3: Overo: Clean up pin mux and GPIO configuration                                               
02/12 Dirk Behme         [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB                                                              
02/12 Dirk Behme         [U-Boot] [PATCH 2/7 v2] OMAP3: Beagle: Add board revision detection                                                         
02/12 Dirk Behme         [U-Boot] [PATCH 5/7 v2] OMAP3: Add serial number based on die ID                                                            
02/16 Fabio Porcedda     Re: [U-Boot] Atmel AT91 USB Device Controller Driver                                                                        
02/19 Tom                Re: [U-Boot] [PATCH] ARM:OMAP3 Change mmc_init to mmc_legacy_init                                                           
02/20 Dirk Behme         [U-Boot] [PATCH 7/7 v3] OMAP3: Clean up MMC code  
PXA:                                                                                                                                                 
                                                                                                                                                     
12/03 Daniel Mack        Re: [U-Boot] [PATCH] PXA3xx: fix CKEN[AB]                                                                                   

The list of the patch I still need to handle for this merge window

The other are already applied to the mainline ro a pull request is in preparation
or an other version of the patch is expected

Best Regards,
J.


More information about the U-Boot mailing list