[U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB

[Dirk Behme]

Dear Jean-Christophe,

Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 19:55 Thu 12 Feb     , Dirk Behme wrote:
>> OMAP3 core changes necessary for MUSB
>>
>> Signed-off-by: Dirk Behme <dirk.behme at googlemail.com>
>>
>> ---
>> Note: OMAP3 USB code will be sent later to USB maintainer, so
>>       CONFIG_MUSB isn't used anywhere yet. This will avoid
>>       USB maintainer to change OMAP3 core files.
>>
>>  cpu/arm_cortexa8/omap3/clock.c     |    5 +++++
>>  include/asm-arm/arch-omap3/cpu.h   |    2 ++
>>  include/asm-arm/arch-omap3/omap3.h |   11 +++++++++++
>>  3 files changed, 18 insertions(+)
>>
>> Index: u-boot-main/cpu/arm_cortexa8/omap3/clock.c
>> ===================================================================
>> --- u-boot-main.orig/cpu/arm_cortexa8/omap3/clock.c
>> +++ u-boot-main/cpu/arm_cortexa8/omap3/clock.c
>> @@ -377,5 +377,10 @@ void per_clocks_enable(void)
>>  	sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON);
>>  	sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON);
>>  
>> +#ifdef CONFIG_MUSB
>> +	/* Enable the MUSB interface clock */
>> +	sr32(&prcm_base->iclken1_core, 4, 1, 0x1);
>> +#endif
> the design of u-boot is to enagle the IP only when he use it
> so please do not enable the clock every time just when you want to use
> (in the USB driver init)

This is already answered in

http://lists.denx.de/pipermail/u-boot/2009-February/047452.html

??

Best regards

Dirk