[U-Boot] [PATCH] i.MX31: fir imx31_phycore to work after Linux reboot

[Sascha Hauer]

Hi,

On Sat, Feb 21, 2009 at 10:32:33PM +0100, Wolfgang Denk wrote:
> Dear Guennadi Liakhovetski,
> 
> In message <Pine.LNX.4.64.0902061353280.7686 at axis700.grange> you wrote:
> > 
> > > In message <Pine.LNX.4.64.0902061002160.4970 at axis700.grange> you wrote:
> > > > Upon power on i.MX31 enables most peripheral clocks, Linux disables the ones
> > > 
> > > Why does U-Boot do that?
> > 
> > i.MX31 does that - the CPU, not U-Boot. I.e., this is the default power-on 
> > mode.
> 
> Yea, but U-Boot performs h/w initialization. So why does it not - like
> Linux - set sane defaults (with only the necessary clocks enabled) ?

I simply forgot it. The clock registers do not get resetted on reset,
only on power up.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |