[U-Boot] Status open patches: ARM, AT91, IXP, PXA

[Peter Tyser]

On Sun, 2009-02-22 at 01:00 +0100, Wolfgang Denk wrote:
> Dear Jean-Christophe,
> 
> I have the following patches still marked as open in my list. Could
> you please have a look... 
> 
> ARM, AT91:
> 
> 04/24 michael            [U-Boot-Users] [PATCH ARM 0/2] Ide support
> 04/24 michael            [U-Boot-Users] [PATCH ARM 1/2] Ide support io function
> 04/24 michael            [U-Boot-Users] [PATCH ARM 2/2] Ide support. Ide registration
> 08/15 Sergey Lapin       [U-Boot] [PATCH][Re-submit] Hardware watchdog support for AT91SAM9260 CPU
> 08/28 Markus Kammerstet  [U-Boot] PATCH: U-Boot support for Olimex SAM9L-9260 development board
> 10/07 "Alan Carvalho de  [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM
> 10/07 "Alan Carvalho de  [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash
> 10/13 "Roman Mashak"     [U-Boot] [PATCH] ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
> 10/21 Tomohiro Masubuch  [U-Boot] [PATCH v4] Add support for KMC KZM-ARM11-01 board
> 10/23 Magnus Lilja       [U-Boot] [PATCH 1/2] i.MX31: Use do_div for some calculations.
> 10/23 Magnus Lilja       [U-Boot] [PATCH 2/2] i.MX31: Add basic support for Freescale's i.MX31 PDK board.
> 11/07 Ilko Iliev         [U-Boot] [PATCH] at91: add support for PM9261 board
> 11/13 Chaofu Chen        [U-Boot] [PATCH] bug fix for the delay function of ARM s3c44b0
> 11/21 Hugo Villeneuve    [U-Boot] [PATCH 1/1] ARM DaVinci: Add common peripherals and modules enable functions.
> 11/26 Jens Scharsig      [U-Boot] [PATCH] AT91RM9200 BGA port D defines
> 12/04 Stefan Althoefer   [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1
> 12/11 Rohit Hagargundgi  [U-Boot] [PATCH v2 2/4] Environment support for Flex-OneNAND
> 12/11 Rohit Hagargundgi  [U-Boot] [PATCH v2 3/4] JFFS2 commands support for Flex-OneNAND
> 12/11 Rohit Hagargundgi  [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command
> 12/11 Rohit Hagargundgi  [U-Boot] [PATCH 0/3] Bad blocks and Partition support for OneNAND / Flex-OneNAND
> 12/11 Rohit Hagargundgi  [U-Boot] [PATCH 1/3] Bad block support for environment variables partition in OneNAND
> 12/11 Rohit Hagargundgi  [U-Boot] [PATCH 2/3] Add partition based OneNAND commands
> 12/11 Rohit Hagargundgi  [U-Boot] [PATCH 3/3] Create bad block aware partition table
> 12/13 Jean-Christophe P  [U-Boot] [PATCH] integratorap: fix PCI support
> 12/14 Dirk Behme         [U-Boot] [PATCH 01/15 v6] OMAP3: Add pin mux, clock and cpu headers
> 12/14 Dirk Behme         [U-Boot] [PATCH 05/15 v6] OMAP3: Add common board, interrupt and system info
> 12/17 Peter Tyser        [U-Boot] [PATCH v6 0/3] Support for XPedite5370 and misc GPIO

The 3 patches above have already made it into mainline.

Best,
Peter