[U-Boot] PXA build failure

[Sergey Lapin]

Hi, all!

I am used to build at91 board using Angstrom EABI toolchain (gcc-4.2.4)
without any problems. Now I try to build PXA board and have the
following error on final link stage: (I build master branch)

cd /home/slapin/u-boot && ~/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld -Bstatic -T /home/slapin/u-boot/board/pxa255_idp/u-boot.lds  -Ttext 0xa3080000 $UNDEF_SYM cpu/pxa/start.o \
			--start-group lib_generic/libgeneric.a lib_generic/lzma/liblzma.a cpu/pxa/libpxa.a lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a net/libnet.a disk/libdisk.a drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a drivers/dma/libdma.a drivers/fpga/libfpga.a drivers/gpio/libgpio.a drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a drivers/input/libinput.a drivers/misc/libmisc.a drivers/mmc/libmmc.a drivers/mtd/libmtd.a drivers/mtd/nand/libnand.a drivers/mtd/nand_legacy/libnand_legacy.a drivers/mtd/onenand/libonenand.a drivers/mtd/ubi/libubi.a drivers/mtd/spi/libspi_flash.a drivers/net/libnet.a drivers/net/phy/libphy.a drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a common/libcommon.a libfdt/libfdt.a api/libapi.a post/libpost.a board/pxa255_idp/libpxa255_idp.a --end-group -L /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4 -lgcc \
			-Map u-boot.map -o u-boot
/home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivsi3.o): In function `__aeabi_uidiv':
/home/slapin/openedhand/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.4-r3/gcc-4.2.4/gcc/config/arm/lib1funcs.asm:730: multiple definition of `__udivsi3'
lib_arm/libarm.a(_udivsi3.o):/home/slapin/u-boot/lib_arm/_udivsi3.S:17: first defined here
/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: ERROR: Source object /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivdi3.o) has EABI version 4, but target u-boot has EABI version 0
/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: failed to merge target specific data of file /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivdi3.o)
/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: ERROR: Source object /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_umoddi3.o) has EABI version 4, but target u-boot has EABI version 0
/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: failed to merge target specific data of file /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_umoddi3.o)
/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: ERROR: Source object /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivsi3.o) has EABI version 4, but target u-boot has EABI version 0
/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: failed to merge target specific data of file /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivsi3.o)
/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: ERROR: Source object /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_clz.o) has EABI version 4, but target u-boot has EABI version 0
/home/slapin/openedhand/tmp/cross/bin/arm-angstrom-linux-gnueabi-ld: failed to merge target specific data of file /home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_clz.o)
/home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_udivdi3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0'
/home/slapin/openedhand/tmp/cross/lib/gcc/arm-angstrom-linux-gnueabi/4.2.4/libgcc.a(_umoddi3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0'

Board name is pxa255_idp. It seems that only PXA does have these problems,
I have tried some other boards and had no problems, again.

Any ideas?
S.