[U-Boot] [PATCH 3/9 v3] 83xx, kmeter1: add I2C, dtt, eeprom support

[Kim Phillips]

On Thu, 19 Feb 2009 17:24:05 +0100
Heiko Schocher <hs at denx.de> wrote:

> This patch adds I2C support for the Keymile kmeter1 board.
> It uses the First I2C Controller from the CPU, for
> accessing 4 temperature sensors, an eeprom with IVM data
> and the booteeprom over a pca9547 mux.
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>
> ---
> I let the dtt_bus env variable in this patch, and remove this,
> when I send a patch for moving dtt_init after relocation is
> done. Then this is no longer needed.

These things usually work the other way around; please fix this so
dtt_bus isn't needed.

Kim