[U-Boot] [PATCH 2/7] Rename SC520 Configuration Options
Graeme Russ
graeme.russ at gmail.com
Tue Feb 24 11:12:20 CET 2009
Options are now all uniformly CONFIG_SYS_SC520_<option>
Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
---
board/sc520_cdp/sc520_cdp.c | 16 ++++++++--------
cpu/i386/sc520/sc520.c | 6 +++---
cpu/i386/timer.c | 2 +-
include/configs/eNET.h | 12 ++++++------
include/configs/sc520_cdp.h | 14 +++++++-------
include/configs/sc520_spunk.h | 10 +++++-----
6 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c
index 779f957..1ddce7e 100644
--- a/board/sc520_cdp/sc520_cdp.c
+++ b/board/sc520_cdp/sc520_cdp.c
@@ -575,10 +575,10 @@ int spi_eeprom_write(int x, int offset, uchar *buffer, int len)
void spi_init_f(void)
{
-#ifdef CONFIG_SC520_CDP_USE_SPI
+#ifdef CONFIG_SYS_SC520_CDP_USE_SPI
spi_eeprom_probe(1);
#endif
-#ifdef CONFIG_SC520_CDP_USE_MW
+#ifdef CONFIG_SYS_SC520_CDP_USE_MW
mw_eeprom_probe(2);
#endif
}
@@ -595,13 +595,13 @@ ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
offset |= addr[i];
}
-#ifdef CONFIG_SC520_CDP_USE_SPI
+#ifdef CONFIG_SYS_SC520_CDP_USE_SPI
res = spi_eeprom_read(1, offset, buffer, len);
#endif
-#ifdef CONFIG_SC520_CDP_USE_MW
+#ifdef CONFIG_SYS_SC520_CDP_USE_MW
res = mw_eeprom_read(2, offset, buffer, len);
#endif
-#if !defined(CONFIG_SC520_CDP_USE_SPI) && !defined(CONFIG_SC520_CDP_USE_MW)
+#if !defined(CONFIG_SYS_SC520_CDP_USE_SPI) && !defined(CONFIG_SYS_SC520_CDP_USE_MW)
res = 0;
#endif
return res;
@@ -619,13 +619,13 @@ ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
offset |= addr[i];
}
-#ifdef CONFIG_SC520_CDP_USE_SPI
+#ifdef CONFIG_SYS_SC520_CDP_USE_SPI
res = spi_eeprom_write(1, offset, buffer, len);
#endif
-#ifdef CONFIG_SC520_CDP_USE_MW
+#ifdef CONFIG_SYS_SC520_CDP_USE_MW
res = mw_eeprom_write(2, offset, buffer, len);
#endif
-#if !defined(CONFIG_SC520_CDP_USE_SPI) && !defined(CONFIG_SC520_CDP_USE_MW)
+#if !defined(CONFIG_SYS_SC520_CDP_USE_SPI) && !defined(CONFIG_SYS_SC520_CDP_USE_MW)
res = 0;
#endif
return res;
diff --git a/cpu/i386/sc520/sc520.c b/cpu/i386/sc520/sc520.c
index b958f8d..2ac3fd4 100644
--- a/cpu/i386/sc520/sc520.c
+++ b/cpu/i386/sc520/sc520.c
@@ -28,7 +28,7 @@
#include <common.h>
#include <config.h>
#include <pci.h>
-#ifdef CONFIG_SC520_SSI
+#ifdef CONFIG_SYS_SC520_SSI
#include <asm/ic/ssi.h>
#endif
#include <asm/io.h>
@@ -390,7 +390,7 @@ void pci_sc520_init(struct pci_controller *hose)
#endif
-#ifdef CONFIG_SYS_TIMER_SC520
+#ifdef CONFIG_SYS_SC520_TIMER
void reset_timer(void)
@@ -504,7 +504,7 @@ u8 ssi_rx_byte(void)
return read_mmcr_byte(SC520_SSIRCV);
}
-#ifdef CONFIG_SYS_RESET_SC520
+#ifdef CONFIG_SYS_SC520_RESET
void reset_cpu(ulong addr)
{
printf("Resetting using SC520 MMCR\n");
diff --git a/cpu/i386/timer.c b/cpu/i386/timer.c
index 46db23f..79039c2 100644
--- a/cpu/i386/timer.c
+++ b/cpu/i386/timer.c
@@ -72,7 +72,7 @@ int timer_init(void)
}
-#ifdef CONFIG_SYS_TIMER_GENERIC
+#ifdef CONFIG_SYS_GENERIC_TIMER
/* the unit for these is CONFIG_SYS_HZ */
diff --git a/include/configs/eNET.h b/include/configs/eNET.h
index 447c7bc..2ae79d8 100644
--- a/include/configs/eNET.h
+++ b/include/configs/eNET.h
@@ -40,8 +40,8 @@
#define DEBUG_PARSER
#define CONFIG_X86 1 /* Intel X86 CPU */
-#define CONFIG_SC520 1 /* AMD SC520 */
-#define CONFIG_SC520_SSI
+#define CONFIG_SYS_SC520 1 /* AMD SC520 */
+#define CONFIG_SYS_SC520_SSI
#define CONFIG_SHOW_BOOT_PROGRESS 1
#define CONFIG_LAST_STAGE_INIT 1
@@ -142,10 +142,10 @@
* CPU Features
*/
#define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */
-#undef CONFIG_SYS_RESET_SC520 /* use SC520 MMCR's to reset cpu */
-#define CONFIG_SYS_TIMER_SC520 /* use SC520 swtimers */
-#undef CONFIG_SYS_TIMER_GENERIC /* use the i8254 PIT timers */
-#undef CONFIG_SYS_TIMER_TSC /* use the Pentium TSC timers */
+#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */
+#define CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */
+#undef CONFIG_SYS_GENERIC_TIMER /* use the i8254 PIT timers */
+#undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */
#define CONFIG_SYS_USE_SIO_UART 0 /* prefer the uarts on the SIO to those
* in the SC520 on the CDP */
diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index 9f2357b..cb0de42 100644
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -35,7 +35,7 @@
*/
#define CONFIG_X86 1 /* This is a X86 CPU */
-#define CONFIG_SC520 1 /* Include support for AMD SC520 */
+#define CONFIG_SYS_SC520 1 /* Include support for AMD SC520 */
#define CONFIG_ALI152X 1 /* Include support for Ali 152x SIO */
#define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6 /* 6T */
@@ -47,10 +47,10 @@
#define CONFIG_SYS_SDRAM_CAS_LATENCY_3T
#define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */
-#undef CONFIG_SYS_RESET_SC520 /* use SC520 MMCR's to reset cpu */
-#undef CONFIG_SYS_TIMER_SC520 /* use SC520 swtimers */
-#define CONFIG_SYS_TIMER_GENERIC 1 /* use the i8254 PIT timers */
-#undef CONFIG_SYS_TIMER_TSC /* use the Pentium TSC timers */
+#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */
+#undef CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */
+#define CONFIG_SYS_GENERIC_TIMER 1 /* use the i8254 PIT timers */
+#undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */
#define CONFIG_SYS_USE_SIO_UART 0 /* prefer the uarts on the SIO to those
* in the SC520 on the CDP */
@@ -147,8 +147,8 @@
#define CONFIG_SPI
#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/
#define CONFIG_ENV_OFFSET 0
-#define CONFIG_SC520_CDP_USE_SPI /* Store configuration in the SPI part */
-#undef CONFIG_SC520_CDP_USE_MW /* Store configuration in the MicroWire part */
+#define CONFIG_SYS_SC520_CDP_USE_SPI /* Store configuration in the SPI part */
+#undef CONFIG_SYS_SC520_CDP_USE_MW /* Store configuration in the MicroWire part */
#define CONFIG_SPI_X 1
/*
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index 50af732..3e86184 100644
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -34,7 +34,7 @@
*/
#define CONFIG_X86 1 /* This is a X86 CPU */
-#define CONFIG_SC520 1 /* Include support for AMD SC520 */
+#define CONFIG_SYS_SC520 1 /* Include support for AMD SC520 */
#define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6 /* 6T */
#define CONFIG_SYS_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
@@ -45,10 +45,10 @@
#define CONFIG_SYS_SDRAM_CAS_LATENCY_3T
#define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */
-#undef CONFIG_SYS_RESET_SC520 /* use SC520 MMCR's to reset cpu */
-#undef CONFIG_SYS_TIMER_SC520 /* use SC520 swtimers */
-#define CONFIG_SYS_TIMER_GENERIC 1 /* use the i8254 PIT timers */
-#undef CONFIG_SYS_TIMER_TSC /* use the Pentium TSC timers */
+#undef CONFIG_SYS_SC520_RESET /* use SC520 MMCR's to reset cpu */
+#undef CONFIG_SYS_SC520_TIMER /* use SC520 swtimers */
+#define CONFIG_SYS_GENERIC_TIMER 1 /* use the i8254 PIT timers */
+#undef CONFIG_SYS_TSC_TIMER /* use the Pentium TSC timers */
#define CONFIG_SYS_STACK_SIZE 0x8000 /* Size of bootloader stack */
More information about the U-Boot
mailing list