[U-Boot] [PATCH 9/9 v4] ARM: add an "eet" variant of the imx31_phycore board

[Anatolij Gustschin]

On Monday 23 February 2009 01:34:32 pm Guennadi Liakhovetski wrote:
> The "eet" variant of the imx31_phycore board has an OLED display, using a
> s6e63d6 display controller on the first SPI interface, using GPIO57 as a
> chip-select for it. With this configuration you can display 256 colour BMP
> images in 16-bit RGB (RGB565) LCD mode.
>
> Signed-off-by: Guennadi Liakhovetski <lg at denx.de>
> ---
>
> On Mon, 23 Feb 2009, Anatolij Gustschin wrote:
> > can you please address comments from Jean-Christophe to this 9/9 v3
> > patch? I'm steel waiting for ACK from Jean-Christophe for 1/9 v4,  2/9 v4
> > and 9/9 v3 patches from this series.
>
> Oops, sorry, I was sure I had sent it already.
>
> Changes since v1: adjusted to reflect changes in earlier patches: add .id
> field initialisation, configuration parameter renamed to CONFIG_S6E63D6.
> Changes since v2: fixed the left-over CONFIG_DISPLAY_S6E63D6 parameter.
> Changes since v3: added a comment to clarify the SPI chipselect value.
>
>  Makefile                              |    6 +++-
>  board/imx31_phycore/imx31_phycore.c   |   57
> +++++++++++++++++++++++++++++++++ include/asm-arm/arch-mx31/mx31-regs.h |  
> 16 +++++++++
>  include/configs/imx31_phycore.h       |   23 +++++++++++++
>  4 files changed, 101 insertions(+), 1 deletions(-)

Applied to u-boot-video/master,
also fixed by s/imx31_phycore_eet_config,/_eet_,/

Thanks,
Anatolij