[U-Boot] change autoboot

[bundy]

Dear Wolfgang Denk

Sorry I was unclear in my question, its not that saveenv doesn't work as it
does, it was that I was hoping
to do it through the build system/configuration file. 

Bundy


wd wrote:
> 
> Dear bundy,
> 
> In message <22195894.post at talk.nabble.com> you wrote:
>> 
>> uboot is currently configured to autoboot with "run boot_nor". In the
>> configuration I found a variable called BOOTCOMMAND which is set to "run
>> boot_nor". Which I now want to set it to "run prog_all_usb; run boot_nor" 
>> I then recompile everything transfer u-boot to my device and on initial
>> startup it works but if I turn my device off and back on it and interrupt
>> autoboot and type "printenv". The bootcmd is set back to just "run
>> boot_nor"
>> - what am i missing??????????????
> 
> If you had bothered to read the manual you should have known that
> rebuilding U-Boot is not necessary for such a simple change - a simple
> "setenv" followed by a "saveenv" would have been all you needed.
> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> "It is easier to port a shell than a shell script."      - Larry Wall
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

-- 
View this message in context: http://www.nabble.com/change-autoboot-tp22195894p22209226.html
Sent from the Uboot - Users mailing list archive at Nabble.com.