[U-Boot] u-boot-v2 rc7
John Jeffers
jjeffers at lufkin.com
Wed Feb 25 22:04:56 CET 2009
In "~/u-boot-v2/board/pcm038/env/config
(and in most other boards in v2)
the following is found:
/****+
autoboot_timeout=3
nfsroot="/ptx/work/octopus/rsc/svn/oselas/bsp/phytec/phyCORE-i.MX27/OSELAS.BSP-Phytec-phyCORE-i.MX27-trunk/root"
bootargs="console=ttymxc0,115200"
-****/
I believe this causes certain scripting in ptxdist to fail "~>ptxdist
test setenv<cr>" since it is setting up uboot configuration for Robert
S.'s machine. It does not actually "hurt" u-boot-v2 rc7 since the
knowledgeable user will make this go away for his board.
Likely the community would be better served if there was a comment as
the following:
#really make sure this points to the nfs root source. Assuming the BSP
was at the user home. ~>
nfsroot="/OSELAS.BSP-Phytec-phyCORE-8/projectroot"
It may be useful to fix this as a question to the user.//
More information about the U-Boot
mailing list