[U-Boot] SAAT support in U-Boot ppc4xx

[Wolfgang Denk]

Dear renjith kumar,

In message <a8474bd70902260249i12141802j28a1865137d98da1 at mail.gmail.com> you wrote:
> 
> I have u-boot 1.3.1 installed in a sequoia board with ppc4xxEPx.
> The "pci" command lists out normal PCI cards in the prompt. (Bridge,
> Multimedia etc.).
> 
> But When I use a PCI-SATA card, the s/m gets hangs, most of the time.
> Else it will not list out the Device in the "pci" command.

In the first step, please update U-Boot and use a recent verison,
i. e. v2009.03-rc1;  then test again.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You can only live once, but if you do it right, once is enough.