[U-Boot] [PATCH] ppc4xx: Add loadpci command to esd's CPCI4052 and CPCI405AB boards

Matthias Fuchs matthias.fuchs at esd-electronics.com
Fri Jan 2 12:18:49 CET 2009


This patch adds esd's loadpci BSP command to CPCI4052 and
CPCI405AB board. This requires CONFIG_CMD_BSP and CONFIG_PRAM.

Signed-off-by: Matthias Fuchs <matthias.fuchs at esd-electronics.com>
---
 board/esd/cpci405/Makefile  |    1 +
 include/configs/CPCI4052.h  |    2 ++
 include/configs/CPCI405AB.h |    3 +++
 3 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/board/esd/cpci405/Makefile b/board/esd/cpci405/Makefile
index 3867bd8..7516c22 100644
--- a/board/esd/cpci405/Makefile
+++ b/board/esd/cpci405/Makefile
@@ -29,6 +29,7 @@ endif
 LIB	= $(obj)lib$(BOARD).a
 
 COBJS	= $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+COBJS	+= ../common/cmd_loadpci.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index e231fa7..d0b4d11 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -216,6 +216,8 @@
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
+#define CONFIG_PRAM		0	/* use pram variable to overwrite */
+
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 2319c58..69c8c6e 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -92,6 +92,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
+#define CONFIG_CMD_BSP
 #define CONFIG_CMD_EEPROM
 
 
@@ -212,6 +213,8 @@
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
 #define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
 
+#define CONFIG_PRAM		0	/* use pram variable to overwrite */
+
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
-- 
1.5.6.3



More information about the U-Boot mailing list