[U-Boot] Problem while using u-boot for Omap 2430 sdp

[Vijay Kolhal]

Dear Sir / Madam,
I have tried using u-boot code for Omap 2430 sdp. after using command,
make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-

I am able to create boot image u-boot.bin and it also Run in Nor flash of 
board.

But when i instered on puts(); statement or printf(); statement in 
icache_enable() function of cpu\arm1136\cpu.c file, Though it gets compile 
well and it create u-boot.bin image file, It doesnt get execute on Omap 
2430 board.

Currently i am debugging this issue but anyone of you know it in advance 
then please direct me for the same.

Thanks and in advacne for any of your helf.

Vijay V. Kolhal.
Lnt Infotech  Ltd.,
Mahape, New Mumbai,

Email :- vijay.kolhal at lntinfotech.com
               vvk2200 at gmail.com
Cell No. :- 9920048840


Larsen & Toubro Infotech Ltd.
www.Lntinfotech.com

This Document is classified as: 

L&T Infotech Proprietary   L&T Infotech Confidential   L&T Infotech 
Internal Use Only   L&T Infotech General Business 

This Email may contain confidential or privileged information for the 
intended recipient (s) If you are not the intended recipient, please do 
not use or disseminate the information, notify the sender and delete it 
from your system. 

______________________________________________________________________