[U-Boot] [PATCH v3 0/5] usb : musb : Add MUSB contorller driver and enable Davinci MSC support

[Remy Bohmer]

Hello Thomas,

2009/1/4 Thomas Abraham <t-abraham at ti.com>:
> This patch series adds Mentor Graphics USB OTG host controller
> driver support and MSC support for DM6446 (TI DaVinci) platform.
>
> - [PATCH v3 1/5] usb : musb : Adding host controller driver for Mentor USB controller.
> - [PATCH v3 2/5] usb : musb : Adding USB VBUS enable functionality for DM6446 DVEVM.
> - [PATCH v3 3/5] usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support.
> - [PATCH v3 4/5] usb : musb : Enabling DM6446 (TI DaVinci) USB module power.
> - [PATCH v3 5/5] usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform.
>

Before I loose track of all the versionnumbers of all the different
series that are somehow dependant on each other, I moved this series
to the 'testing' branch of u-boot-usb.
I leave the door open for an update of this series when there are
major comments on it.

Kind Regards,

Remy

> Note: This patch series depends on the following patch submitted by
> Michael Trimarchi.
>
> - [U-Boot] [USB PATCH] USB change speed
>
> Changes since v2:
>
> - Addressed changes suggested by Dirk Behme
> - Added register overlay structure to access mentor USB module registers
>
> Changes since v1:
>
> - Rebased to U-Boot USB next branch
> - Removed high element from usb_device structure
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>