[U-Boot] scc-uart on mpc8265 not working

[Jyotshna Cherukuri]

Hi All,

I am using a custom powerpc board with MPC8265 ( 66/200/300 Mhz) , 
32MB of SDRAM     ( 0x00000000 - 0x01FFFFFF)  and 
8 MB of Flash Simm ( 0xFF800000 -  0xFFFFFFFF) .

I am modifying the MPC8260ads configurations in u-boot to match my board but I don't
see any messages being printed on the serial console. Can anyone please let me know what I need to change in u-boot to initialize the console properly. Do I need to go into the routine board_early_init_f for MPC8265 ?
Please let me know


Thanks in advance
Best Regards
Jyotshna