[U-Boot] [PATCH 2/3] mpc83xx: Add PCI-E support for MPC8315ERDB boards

[Anton Vorontsov]

On Thu, Jan 08, 2009 at 04:26:17AM +0300, Anton Vorontsov wrote:
[...]
> +#define CONFIG_SYS_PCIE1_BASE		0xA0000000
> +#define CONFIG_SYS_PCIE1_MEM_BASE	0xA0000000
> +#define CONFIG_SYS_PCIE1_MEM_PHYS	0xA0000000
> +#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000
> +#define CONFIG_SYS_PCIE1_CFG_BASE	0xB0000000
> +#define CONFIG_SYS_PCIE1_CFG_SIZE	0x01000000

Kim,

I recall you were concerned about 16MB cfg window. Just to clarify,
now Linux doesn't actually care about the cfg window size, it maps
only 4kB (minimal size) of it.

But to avoid changing PCI-E address map completely (thus to make
mainline Linux run on the FSL BSP U-Boots), I left the 16 MB size
intact (though I may as well write the size as 0x1000 w/o changing
IO_BASE, but then there will be a hole between cfg and io regions).

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2