[U-Boot] [PATCH 2/3] PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit

[Roy Zang]

From: Roy Zang <tie-fei.zang at freescale.com>

PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of
PCIE1 bit.
On MPC8572DS board, PCIE refers to PCIE1.
Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
---
 board/freescale/mpc8572ds/mpc8572ds.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index 11c30b2..e57f9ff 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -170,7 +170,7 @@ void pci_init_board(void)
 		struct pci_region *r = hose->regions;
 		u32 temp32;
 
-		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
 			printf ("\n    PCIE3 connected to ULI as %s (base address %x)",
 					pcie_ep ? "End Point" : "Root Complex",
 					(uint)pci);
@@ -237,7 +237,7 @@ void pci_init_board(void)
 		int pcie_configured  = (io_sel == 0x3) || (io_sel == 0x7);
 		struct pci_region *r = hose->regions;
 
-		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
 			printf ("\n    PCIE2 connected to Slot 1 as %s (base address %x)",
 					pcie_ep ? "End Point" : "Root Complex",
 					(uint)pci);