[U-Boot] [PATCH 1/1] sh/serial: use readx/writex accessors
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Sun Jan 11 16:35:16 CET 2009
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 0ba88ea..36770bb 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -18,6 +18,7 @@
*/
#include <common.h>
+#include <asm/io.h>
#include <asm/processor.h>
#if defined(CONFIG_CONS_SCIF0)
@@ -132,17 +133,17 @@ void serial_setbrg(void)
{
DECLARE_GLOBAL_DATA_PTR;
- *SCBRR = SCBRR_VALUE(gd->baudrate, CONFIG_SYS_CLK_FREQ);
+ writeb(SCBRR_VALUE(gd->baudrate, CONFIG_SYS_CLK_FREQ), SCBRR);
}
int serial_init(void)
{
- *SCSCR = (SCR_RE | SCR_TE);
- *SCSMR = 0;
- *SCSMR = 0;
- *SCFCR = (FCR_RFRST | FCR_TFRST);
- *SCFCR;
- *SCFCR = 0;
+ writew((SCR_RE | SCR_TE), SCSCR);
+ writew(0, SCSMR);
+ writew(0, SCSMR);
+ writew((FCR_RFRST | FCR_TFRST), SCFCR);
+ readw(SCFCR);
+ writew(0, SCFCR);
serial_setbrg();
return 0;
@@ -151,9 +152,9 @@ int serial_init(void)
static int serial_rx_fifo_level(void)
{
#if defined(SCRFDR)
- return (*SCRFDR >> 0) & FIFOLEVEL_MASK;
+ return (readw(SCRFDR) >> 0) & FIFOLEVEL_MASK;
#else
- return (*SCFDR >> 0) & FIFOLEVEL_MASK;
+ return (readw(SCFDR) >> 0) & FIFOLEVEL_MASK;
#endif
}
@@ -162,15 +163,15 @@ void serial_raw_putc(const char c)
unsigned int fsr_bits_to_clear;
while (1) {
- if (*SCFSR & FSR_TEND) { /* Tx fifo is empty */
+ if (readw(SCFSR) & FSR_TEND) { /* Tx fifo is empty */
fsr_bits_to_clear = FSR_TEND;
break;
}
}
- *SCFTDR = c;
+ writeb(c, SCFTDR);
if (fsr_bits_to_clear != 0)
- *SCFSR &= ~fsr_bits_to_clear;
+ writew(readw(SCFSR) & ~fsr_bits_to_clear, SCFSR);
}
void serial_putc(const char c)
@@ -197,21 +198,21 @@ int serial_tstc(void)
void handle_error(void)
{
- (void)*SCFSR;
- *SCFSR = FSR_ERR_CLEAR;
- (void)*SCLSR;
- *SCLSR = 0x00;
+ readw(SCFSR);
+ writew(FSR_ERR_CLEAR, SCFSR);
+ readw(SCLSR);
+ writew(0x00, SCLSR);
}
int serial_getc_check(void)
{
unsigned short status;
- status = *SCFSR;
+ status = readw(SCFSR);
if (status & (FSR_FER | FSR_ER | FSR_BRK))
handle_error();
- if (*SCLSR & LSR_ORER)
+ if (readw(SCLSR) & LSR_ORER)
handle_error();
return status & (FSR_DR | FSR_RDF);
}
@@ -224,15 +225,15 @@ int serial_getc(void)
while (!serial_getc_check())
;
- ch = *SCFRDR;
- status = *SCFSR;
+ ch = readb(SCFRDR);
+ status = readw(SCFSR);
- *SCFSR = RDRF_CLEAR;
+ writew(RDRF_CLEAR, SCFSR);
if (status & (FSR_FER | FSR_FER | FSR_ER | FSR_BRK))
handle_error();
- if (*SCLSR & LSR_ORER)
+ if (readw(SCLSR) & LSR_ORER)
handle_error();
return ch;
--
1.5.6.5
More information about the U-Boot
mailing list