[U-Boot] Using U-boot on the IXP432

[Martijn de Gouw]

Hi, 

> > I have been using a board with and IXP432 for about a year 
> now, starting
> > with Redboot
> > but running in big endian mode. 
> > I am now looking at using u-boot for network booting but I 
> would like to
> > run it in little endian mode.
> > Before I get stuck into to porting the code I have a few questions.
> >  
> > 1) Has anybody else ported the code to the IXP432?
> I've hear about someone I'll try to canctact him
> but the ixp432 is really simmilar to the ixp425 so it will be 
> not difficult to
> port
> IIRC the most important work will be on the network support
> > 2) Is there any reason that the IXP cpu configuration sets 
> the bigendian

The ixp npe code is a big endian only binary blob.
If you don't want network support you can run the ixp in little endian
mode.

Gr, Martijn 

Disclaimer: The information contained in this email, including any attachments is 
confidential and is for the sole use of the intended recipient(s). Any unauthorized 
review, use, disclosure or distribution is prohibited. If you are not the intended 
recipient, please notify the sender immediately by replying to this message and 
destroy all copies of this message and any attachments.